EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

Alright my friends it has come time for me to sell off all my parts and pieces I have been collecting for the last two years. I was planning on building a truck and a blazer but somehow life has a different plan for us sometimes. Therefore, everything must go. I have found a great deal of help in this website and have appreciated all of the tips about what to do and what not to do when building these truckks back. You guys have helped me over the last couple of years learn about these trucks and I thank you. Now I just hope that my collection can go out to you guys to help you along with your project.
The list below is about as good as inventory as I can come up with. I am sure I am missing a few things so if you are needing something please let me know. I am guessing at a lot of these prices so if you see something that you think is too high or too low please let me know that as well!!!! I have many Suburban and Blazer Parts as well. Check out the thread in that forum with the ALL MUST GO title. Here we go

Longbed w/ Factory Tool Box on Passenger Side, Have Door for it ??
Transmission Crossmembers - qty 3
Rolling Long Bed 1/2 Ton Frame, 5 Lug Disc Brake Power Steering $350
69 Model Non A/C Cab, Needs Driver Rocker & Corner, No Title $200
?? Model A/C Cab, Needs Rocker & Corners, No Title $300
6 Lug 12 Bolt Rear End for 1/2 Ton Truck $150 Out of 69 Model
Non Tilt Auto Columns - qty 3 $25 ea
Bench Seat Frames - qty 3 $25ea
Complete Non A/C Dashes, Not Cut Up - qty 2 $100ea
Complete A/C Dash, Not Cut Up $150
Step Side Rail Supports, Complete Set $75
Blazer/Suburban Gas Tank - $75ea
Step Side Drivers Bed Side $125
Step Side Front Panels - qty 2 $75ea
Step Side CHEVROLET stamped Tail Gates
4X4 Transmission Tunnel Cover $75
Step Side Short Drivers Side Step $35
Pair of Step Side Long Steps $75
Wide Bed Wheel Housings $25ea
69-72 Hoods - qty 3 $100 to $150
Step Side Drivers Fenders w/ spare cut out - qty 2 $100ea
67-68 Grill Shell $200
72 Grill Assembly w/ Bow Tie $200
69-72 Driver Fender Rust Free - qty 2 $75ea
Drivers Inner Fender $40
Radiator/Core Support Battery Tray Rusted but nothing else $75
67-72 Rear Chrome Bumper $50 Aftermarket
67-70 Chrome Front Bumper $75 Original but needs some edge straightening
Turbo 350 2wd Trans $75
350 4 Bolt Main Block only with Caps $100
Complete 454 Big Block w/ accessories $650
I have many interior pieces, brackets and just other stuff that I havent even gone through yet. So please ask!!

I would be happy to ship any items that are shippable as long as the frieght is paid for. I have a PayPal account for such transactions.

For Pick Up, I am located just outside of Oklahoma City.

Feel free to contact me with any questions or comments at redline5.0junkie@gmail.com

I have posted a few photos of the items above on photobucket. Follow the link and enter the password ( allmustgo ) .
http://s1057.photobucket.com/albums/...%2072%20TRUCK/
If you would like more detailed photos or information please let me know.

Thanks for looking and I hope someone out there can put all of this stuff to good use.
Kenny

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

info on 700r4 and condition?

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

Your photo link on both your threads requires a password.

Edit: I am in idiot. I see now that you have provided the password.

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

Have any pics of the doors Interested

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

I need a rear license plate mount and light from one of the bumpers if your willing to sell. 93230

Re: EVERYTHING MUST GO - Blazer & Burban Bodies, Sheetmetal, Hard Top, & More
 

Do you have an NP205 skid plate with crossmember?

Re: EVERYTHING MUST GO - Blazer & Burban Bodies, Sheetmetal, Hard Top, & More
 

Kenny, our photo album says I have to have a password too look at it. Thanks Randy

Re: EVERYTHING MUST GO - Blazer & Burban Bodies, Sheetmetal, Hard Top, & More
 

Inline on the Blazer doors pending pics.
Posted via Mobile Device

Re: EVERYTHING MUST GO - Blazer & Burban Bodies, Sheetmetal, Hard Top, & More
 

interested in more details on:

72 Jimmy Rolling Body Converted to 2wd, This is great for rebuild. Please ask details about this rig, Have Title

sending PM

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

I will take the best set of shortbed step side steps pending on a reply of the condition ie any rust holes under the fenders or dents anywhere and also shipping please to 19559 thanks

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

Very interested in the front and rear bumpers. Are they new? Do you have pics?

I guess I should say I will take both front and rear bumpers pending pic's and condition.

Re: EVERYTHING MUST GO - Blazer & Burban Bodies, Sheetmetal, Hard Top, & More
 

I dont see any pics of the Blazer doors on photobucket. Can I get some pics to chrisb614@aol.com
Thanks,
Chris
Posted via Mobile Device

Re: EVERYTHING MUST GO - Blazer & Burban Bodies, Sheetmetal, Hard Top, & More
 

Randy, it looks like the password is on his thread. (allmustgo)

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

I would be interested in the grille!! got any pics?
shipping to 92065?
thanks

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

looking for a posi rearend 5 lug or a posi carrier.

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

Interested in sm465/205 shiping to 43764

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

2nd on the front and rear bumpers pending pics and condition, and if the rear is for a stepside. Sure wish I could find a "patina'd" white one for the rear....

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

just realized you have two grilles, I'm interested in the 69.

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

Not real sure how to reply to all the responses. I'm actually overwhelmed there's so much interest. Thank you guys!!!

The step side steps are excellent, have patina, but excellent.

The bumpers are not new. As best I can tell factory original. I can email pics. They just need a good polishing.

The 700r4 I'm not real sure about. I got it from a guy that wrecked his truck and pulled the drivetrain before scrapping the truck. I was going to have it rebuilt.

I did forget to put on the list an entire step side wood floor bed. No wood or center supports but all 4 sides and fenders are there. It's the blue bed in the pictures.
Posted via Mobile Device

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

69 grill is original and it's nice. Has a couple of small dings that are very fixable. Where do I need to send pics too?

Sorry, I do not have an extra 5 lug rear. The only one I have is under the rolling frame.

I will just have to check freight on the trans and transfer case. They are heavy!!! I can send a pic if you like. I'm not sure of working order but the shifters move smoothly. They came out of a farm truck that never left the farm.
Posted via Mobile Device

Re: EVERYTHING MUST GO - Blazer & Burban Bodies, Sheetmetal, Hard Top, & More
 

I will get pics of the blazer doors
Posted via Mobile Device

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

I'm in line on the bumpers- Like to look at them soon. Not jumping the gun over anyone but they don't come through- count me in. I'll be in OKC tomorrow evening.

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

In the list there is an item that says drop for $250. What is that? Interested. Thanks, Dustin
Posted via Mobile Device

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

I live in Edmond, could I come by and look at the bumpers?

Re: EVERYTHING MUST GO - Cabs, Frames, Sheetmetal, Parts, Axles & More
 

Disregard my previous post. Lol.
Posted via Mobile Device