The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Console Question (https://67-72chevytrucks.com/vboard/showthread.php?t=608784)

*71SWB*

12-20-2013 08:30 PM

Console Question

This has probably been asked or discussed before and if so I sure hope someone has made custom brackets used to raise the console 3" or so. Has then been done? Does anyone have suggestions on what to use to raise the factory center console ?

john	12-20-2013 08:44 PM

Re: Console Question

I don't have any pics, bit a friend had a piece of dense foam about 4" fitted to the lid and covered in vinyl. Looked good and worked as an armrest.

Tinkermc

12-20-2013 08:51 PM

Re: Console Question

Get some 1" square tubing to make four legs and a piece of 18 gauge to form a top to the legs, mount console on top plate entire job may take 30 minutes.

*71SWB*

12-20-2013 09:06 PM

Re: Console Question

Cool thanks

All times are GMT -4. The time now is 06:15 AM.