The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - 4x4 Big Block Conversion (https://67-72chevytrucks.com/vboard/showthread.php?t=635292)

Jsposito

07-08-2014 12:36 PM

4x4 Big Block Conversion

From reading a handful of threads on here, there seems to be varying experiences with swapping a big block into a 67-72 4x4 truck. I was curious to hear of any fresh perspectives, as I'm planning on pulling the original 402 out of my C20 and putting it into my K20 next week. Any advice from those who have been through this project would be much appreciated! Thanks for the help!

Jsposito

07-10-2014 12:25 AM

Re: 4x4 Big Block Conversion

ttt

Anybody? Someone must have done this before?

kwmech

07-10-2014 12:52 AM

Re: 4x4 Big Block Conversion

Spend the extra money for drivelines and move the engine mounts forward so the engine cylinder heads clear the firewall. OR take a measurement of the mount placement in your other truck and match it to the 4wd frame.

All times are GMT -4. The time now is 02:01 PM.