Floor Pan Replace
I know this subject has been asked and answered, but most of the ones I see are pretty old.
Anyone want to give me their opinion on where I should buy my 72 Blazer floor pan? I imagine there cant be more than a couple, three manufacturers. Thanks in advance. |
Re: Floor Pan Replace
|
Re: Floor Pan Replace
Likely one manufacturer. They all seem to be made by the same company and relabeled. It’s probably pretty pricey for the tooling to do these parts.
|
Re: Floor Pan Replace
GMC Pauls only showed an email that was undeliverable.
I'll look for a phone number. You're probably right about 1 manufacturer. Thanks to you both. |
Re: Floor Pan Replace
They are email only. The robbinspd email worked back in April when I contacted them.
|
Re: Floor Pan Replace
I know lots of you use them, but for the amount of money I'm spending, I'd rather talk to someone. If they're mainly coming from one place, then maybe Brothers, LMC or Wes will do it.
Thanks Lite. |
Re: Floor Pan Replace
If you're wanting to talk to someone you won't use GMC Pauls, e-mail only.
|
Re: Floor Pan Replace
Quote:
|
Re: Floor Pan Replace
You could try Grumpy's in Phoenix.
|
Re: Floor Pan Replace
Have you tried SOKY Classic?
http://sokyclassics.com/product.php?skcid=1003768 Or you can call Donavan at Huey's Classic Auto parts https://hueysautoparts.com/ . |
Re: Floor Pan Replace
|
Re: Floor Pan Replace
Quote:
You may view the discussion under my thread of '72 Jimmy. I did end up using GMC Pauls, and I do have to give them credit. They were very prompt on answering emails. So much so, I will continue to use them. Pat |
Re: Floor Pan Replace
I’ve used GMC Paul’s as well. I know they are picky about the parts they send. They wouldn’t even sell the hoods in the past due to low quality.
|
All times are GMT -4. The time now is 09:06 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com