The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Nearing completion (https://67-72chevytrucks.com/vboard/showthread.php?t=783353)

p0508 03-15-2019 11:16 PM

Nearing completion
 
After 6 months here she sits. If any has any questions about LS swaps, rear end swaps, interior or pretty much anything. This thing has been taken apart and put together from the ground up over the last 6 months. Some odds and ends to clean up here and there but overall I'm happy with where it's at. You can see all the build photos using the google photos link if you're interested.

In summary: It went from a 71 Leaf spring automatic truck to. L33 5.3, T56 magnum, Strange ford 9inch, full ridetech front and rear suspension and vintage air.

https://photos.app.goo.gl/suN7jsh4uRJqrdzN8

https://i.ibb.co/N9v7pyT/20180609-165751.jpg
https://i.ibb.co/ZMTHDt0/20180609-181508.jpg
https://i.ibb.co/SRCYjVs/20180614-192347.jpg
https://i.ibb.co/BC7YHW2/20180701-154116.jpg
https://i.ibb.co/nCzXHKQ/20180717-201243.jpg
https://i.ibb.co/c21R5rC/20181213-120026.jpg
https://i.ibb.co/rfTrxmR/20181214-204048.jpg
https://i.ibb.co/3RCqcfS/20190103-145236.jpg
https://i.ibb.co/jrmvJm5/20190314-120127.jpg
https://i.ibb.co/HPNd8n2/20190314-190643.jpg
https://i.ibb.co/23XysHz/20190314-190653.jpg
https://i.ibb.co/XsYPRsM/20190314-190739.jpg
https://i.ibb.co/4S1q2QQ/20190314-190924.jpg
https://i.ibb.co/LdWKGrP/20190314-190947.jpg
https://i.ibb.co/Fhzjbvq/20190314-190952.jpg
https://i.ibb.co/HYTZ5fy/20190314-190956.jpg
https://i.ibb.co/d7X3DCY/20190314-191027.jpg
https://i.ibb.co/XyrbLDP/20190314-191120.jpg

Boog 03-16-2019 12:37 AM

Re: Nearing completion
 
Looks like it could be tons of fun.

72 tigger 03-16-2019 06:34 AM

Re: Nearing completion
 
Looks good! You’ve put a lot into it- how does it drive?

notsolo 03-16-2019 06:49 AM

Re: Nearing completion
 
Great looking truck, Nice stance, super clean inside and out, 6 months is quick for the amount of work you have done. Some weight in the back might keep those darn wheels from spinning out....Sweeeet!
.

p0508 03-16-2019 09:41 AM

Re: Nearing completion
 
It drives like a little go kart with the ridetech on it. It's pretty stiff right now, still adjusting the coilovers. Yes I really need to get some weight in back at some point, it will see a little single turbo setup in the near future.

Husker 03-16-2019 06:04 PM

Re: Nearing completion
 
Nice job. I have a Tuffy console in my 70 4x4 fits and works great.
Ron

69cam 03-16-2019 07:53 PM

Re: Nearing completion
 
That is going to be a beautiful truck! Love the stance.

cornerstone 03-16-2019 10:08 PM

Re: Nearing completion
 
Oh man. I appreciate the link you added. I looked at every picture and learned quite a bit about several things ahead of me on my build that I've been intimidated about. I ain't skeerd no mo! Such detailed pictures... :metal:
What color do you plan on?
Brian

p0508 03-17-2019 05:36 PM

Re: Nearing completion
 
Color wise it will be two tone. White rockers, White top with some sort of dark blue/gray in the middle. Haven't figured out the exact color I want yet.

If you run into anything on your swap/build or want better pictures on something let me know I'll get them to you.

70c10resto 03-17-2019 09:03 PM

Re: Nearing completion
 
Looks great, how do you like the ridetech setup? I'm thinking of going the same route.

p0508 03-17-2019 09:10 PM

Re: Nearing completion
 
I used ridetech on a 67 camaro I did and haven't looked back since. Their stuff is built well, packaged well, quality made stuff, So far so good on the C10.

berudd 03-17-2019 09:16 PM

Re: Nearing completion
 
Nice work. Love the interior.

Chuck Pryce 03-18-2019 12:15 PM

Re: Nearing completion
 
Nice work, only six months that was quick!

cornerstone 03-18-2019 01:30 PM

Re: Nearing completion
 
Quote:

Originally Posted by Chuck Pryce (Post 8489643)
Nice work, only six months that was quick!

X2! Very quick for the amount of work done. :metal:


All times are GMT -4. The time now is 02:34 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com