76 Blazer LS swap
2 Attachment(s)
Just finished up a Blazer LS3/4L65E swap. thought I would share some pics of the build and maybe help others out if they are looking to do the same feel free to ask questions.
|
Re: 76 Blazer LS swap
5 Attachment(s)
went ahead and installed a new heater core and evaporator so hopefully they don't have to be changed again. I will be using Hooker Blackheart swap headers and engine mounts on this build
|
Re: 76 Blazer LS swap
Beautiful truck!
|
Re: 76 Blazer LS swap
Very nice headers
Are you going to run the A/C system? How did you hook up the gas pedal? DBW or DBC ? What are you doing for the engine harness? Making your own fuel system in the tank? |
Re: 76 Blazer LS swap
Quote:
I will run DBW, I will post pics of the pedal soon the engine/trans will be controlled by a Holley Terminator EFI system in-tank 255lph pump with a corvette regulator/filter |
Re: 76 Blazer LS swap
Quote:
|
Re: 76 Blazer LS swap
5 Attachment(s)
Trans cooler mounted along with the A/C condenser, Earls Ultra-Pro oil cooler
Fuel system build using a Holley 12-914 fuel pump on the factory blazer EFI tank |
Re: 76 Blazer LS swap
Nice truck
|
Re: 76 Blazer LS swap
4 Attachment(s)
Holley EFI going in, Holley will be controlling the LS3 engine and 4L75 trans. made a bracket to mount the GM DBW pedal along with a MSD solid state relay for powering the Dakota Digital dash and Holley ECU
|
Re: 76 Blazer LS swap
Quote:
|
Re: 76 Blazer LS swap
Clean build as always, :metal:.
|
Re: 76 Blazer LS swap
Which upper radiator hose did you use?
Who's radiator did you use? I am doing this conversion on my Suburban and I like your setup. Great job |
Re: 76 Blazer LS swap
And no one mentions the ridiculously clean garage? I'm jealous!
Do you have a part number for the trans cooler and mounts? Or is that the ail cooler sitting in front of the Condenser? Is this a US Forest service truck? I love what you are doing! |
Re: 76 Blazer LS swap
Love it, thanks for the swap tips!
|
Re: 76 Blazer LS swap
Quote:
thank you Luke for sharing & letting us observe your great work!! :metal: |
Re: 76 Blazer LS swap
beautiful ride! love how clean you made the install. I have been thinking my Jimmy might need the LS treatment.
|
Re: 76 Blazer LS swap
Quote:
|
Re: 76 Blazer LS swap
Love the build! Which brand of upper and lower radiator hoses are you using and what are those part numbers? Also, did you do any engine work such as a camshaft or ported heads? How are you liking the power? Is there anything you would have done differently?
Apologies for all of the questions, I just thought I would get them all out in one shot. |
All times are GMT -4. The time now is 10:05 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com