Where did these buckets come from?
2 Attachment(s)
I have been looking for some new seats for my 1970 c10 step side for some time now. I'm a big guy (6'4 300lbs) so I have decided on an 88-94 GM seat to give me the most room. I came across these seats. The guy said these are not the stock seats. To me they look like buddy buckets, but I know they are not. Can someone help me identify them please?
|
Re: Where did these buckets come from?
Favors mid 90's Chevy truck buckets .
|
Re: Where did these buckets come from?
Couple of questions.. Will these work for the application I need them for? Fairly easy installation? Is there supposed to be like a jumper seat in the middle? Or a console?
|
Re: Where did these buckets come from?
Quote:
|
Re: Where did these buckets come from?
Quote:
|
Re: Where did these buckets come from?
Those seats are 88-89 only the seats went to a velour material in model year 1990. Of course the frames were pretty close from 88-94. 95 changed the seats until the end of the run in 98, but the bolt holes remained the same throughout the model style 88-98. I am full of useless info from this model truck I built hundreds of them. Jim
|
Re: Where did these buckets come from?
Quote:
That's great info! Thanks! Call me crazy but these appear to have Valore on them. Did these seats originally come with a console? |
Quote:
Posted via Mobile Device |
Re: Where did these buckets come from?
Before you get to attached to those seats you need to know that they are not built like most other seats in that the material "velour" is bonded to the seat foam base which makes them difficult and expensive to have them reupholstered . if your happy with the blue material you can clean them using Windex and a shop vac also any grease stains will come off by using lacquer thinner sparingly on a lint free towel .:chevy:
|
Re: Where did these buckets come from?
Any of those seats would have had a console in the middle. The outside [around the perimeter] are similar to the later I was referring to the inserts of a tweed like substance, that signifies 88-89. Jim
|
Re: Where did these buckets come from?
Quote:
|
Re: Where did these buckets come from?
That was Chevy's attempt to bring the customer back to the dealerships for replacement seat covers 1992 - 1994 , Until the cost of warranty repairs drove them back to sewn seat covers that didn't require a complete cover .I've done warranty upholstery/glass work for every major dealer Chevy/Dodge/Ford/Mercedes/Jaguar/Buick/Gmc/Pontiac/etc for more than 35 years
From what I remember they came as a 60/40 split and it looks like someone just mounted 2 drivers seats . any good auto upholstery shop can custom build you a set of covers using those as a base but you have to understand they are foam injected covers meaning the seat foam is actually bonded to the material not sewn together and to reupholster them you have to cut off the material and formed foam to leave a flat surface and rebuild from there .. My DD 1995 GMC 3/4 Z-71 has the bonded type seats also There is no reproduction original seat upholstery available as far as I know .Now I'm not talking about slip on covers I'm sure there are thousands of slip over covers available I'm talking about original factory type replacements. Average cost to custom rebuild a set of these seats in vinyl material $900.00 to $1,400.00 depending on what style seats you want in the end .:chevy: When searching for replacements on any car use the word Upholstery not seat covers .or all you will find are slip on covers. |
Re: Where did these buckets come from?
Quote:
Awesome information. I am a little confused. Are you saying these are 1992-1994 seats? I only ask because hugger thinks they are from 88-89. Sorry if I'm just reading that wrong. And so basically this was a 60/40 and someone chucked the 60, found another (40) of the same color and paired them? I was thinking a sufficient route would be getting some black seat covers from cover king. I'm new to interior so I don't really know how good of an option that would be. |
Re: Where did these buckets come from?
Well ... the 60/40 don't have armrests , buckets would .
http://protruckseats.com/index.php/s...hions-416.html As far as a set of slip on covers You get what you pay for it all depends on what your budget is to work with and if you want custom seats or just some covers ? What year truck did you pull them out of ? Your in San Antonio there looks to be about a dozen auto upholstery shops in town drive by and see what they offer ?:chevy: |
Re: Where did these buckets come from?
I will be checking those shops. I've actually been researching the auto upholstery for the past couple of hours. The guy I'm getting them from said they are coming out of a 92. But he said they are not the stock seats for that truck. So I don't know what to think. I don't care so much about having custom seats. I just want them to look nice and match my truck.
|
All times are GMT -4. The time now is 11:25 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com