what did you grease monkeys get done this weekend
I finshed the body work on the fire wall and spit some epoxy primer on it. Here are a few pics of the project.
Thanks to the body pros... sevt_chevelle, MARTINSR and others for the help with fillers and paints. |
Did a burnout in the parking lot at work and filled the shop with smoke.
|
added the trim to my front end and the sills on the door frame.
http://67-72chevytrucks.com/vboard/s....php3?t=154412 |
I removed my tool box door, and took it back to the painter so he repair a couple bubbles in his paint.
|
Quote:
|
Swapped cabs with one I bought in Dallas TruckinDaddy helped as long as 2 of my buddies everything went well except I smashed my cap and rotor
|
1 Attachment(s)
No grease, but got the new door panels on and the ZR2 waxed. Got a whole week off so who knows????
|
2 Attachment(s)
Much hacking on the rear suspension. I've got an extra 3" of clearance for the axle and another 3" of drop on the bags. Pretty soon, I should have this thing fairly low ;)
edit: added pic (if anyone is looking for an excellent photographer for weddings, birthdays, etc., you can tell from this gem that I'm your man! :crazy: ) edit: daytime pic |
Had to work on my carb on the '70 Burb. The Eddlebrock still is not running up to par. But I will get it right.
|
I worked a s@@tload of OT for money to get the Camaro painted, then hauled a load of lumber in the 70 for new railings for the front porch. I got 2 posts set and then it started raining. Fortunatley the wood is salt treated, so it will sit in the truck until tomorrow nite, when it's supposed to be nice weather.
|
Jamis,
You know you shaved the speedo cable and throttle cable hole right ? Well, I went to my G-Friends grad. 6 hour drive to the school it was most of the weekend. She is now a Vet Tech got 2 of the 4 awards handed out too. Pretty good weekend. Good break fromm the truck. I managed to get the holly 600 rebuilt so I can get rid of the 1406 on my 84 DD. And I just broke the faring die for the 3/16 lines I had to flare. Next weekend I will get lots done though. |
Greased the forms,& did concrete around the pool......F... that old truck, I have better things to work on! :crazy: L
|
weekend work
Pulled the cab off the 67 so I could clean and paint the frame.I also am going get rid of my heater.Im putting one off a fork lift on it takes less room under the dash.
|
try to restore my relationship!. No luck so far!
|
Grinding! and some more adjusting. It's been one hell of a week at work so i decided to spend my time in the threaters. if anyone is thinking of seeing the movie CRASH. It's real good.
|
Went to pick up a 2-ton Big Red engine hoist from someone 15 miles away for 100 bucks. Only used once. Truck broke down (overheat?) on the way back. Had to sit on it for a few minutes to make the last mile. First time I've gotten the truck out in a month or so.
|
I got most of my Autometer guages put in and wired. I used the 2 5/8 in for the bottom. I still have to get the speedo and tach. Gonna go with the elec. speedo so I'll have to save a few more bucks for that. I also made my 100th post. :cool:
|
Completed wiring for tuned port setup, installed power steering pump pulley, harmonic balancer, steering column, Lokar shifter linkage to 700R4 tranny, wiring for gas tank, In-Line Tube emergency brake cables, rear brake shoes and bent the fu*k out of the completed and painted passenger side rocker panel with the lift (guess I'll fix that next weekend).
|
1 Attachment(s)
I installed new door panels, a tilt column and new bezel on the GMC, also put new deluxe pedal pads on with stainless trim and painted the clutch & brake swing arms and shifter.
|
Blazerman...those panels rock!!!!!! :)
|
I sold my project...dranks ome beer....not much else... now I am truckless and in the search of a 66-67 chevelle
|
Quote:
yep....but only after my haze from all the welding and beer wore off....I noticed I didnt have the hole for the speedo cable. :dohh: As far as the throttle hole, I'm going with a cable and this had the rod setup and I need the sqaure hole for the cable. I'm sure when I go to put it back together I will find more holes I should have left alone and some I should have closed. LOL I blame my mistakes on this. I was on vacation when I tackled this job and I only drink when I'm on vacation or not on call for work. need less to say I only drink a couple of beers a month and that day I had six |
Saturday I went to NJ to get the fenders, cab corners, rockers, and few other parts zeeklu (chris) offered me back in Feb. Check out his truck and BSed for a little. Drove home to L-town today to fix the 93's alternator and to get my truck to NEPA this week.
Mike |
Quote:
|
Quote:
|
All times are GMT -4. The time now is 05:56 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com