parting 72 chevy c20 custom camper
 

I'm going to try to start parting this truck this weekend. I have a 72 1/2 I have to go get Sat morning so depending on how long it takes to get camper off it, it may be only Sun parting some.

Front fenders are good $60 each, if you want me to ship these figure $100 each for shipping alone
outer grill is nice if someone has time to work the bend out of lower part. $50 no ship
Doors are pretty good, no ship

ASK ALL Questions in thread
Thanks Randy

Re: parting 72 chevy c20 custom camper
 

16

Re: parting 72 chevy c20 custom camper
 

21

Re: parting 72 chevy c20 custom camper
 

26

Re: parting 72 chevy c20 custom camper
 

Hi Randy, could I get a price on engine lift hooks, water neck
Was it running? If So is the carb original ?
Thanks,
Ray

Re: parting 72 chevy c20 custom camper
 

Also oil fill tube.
Thanks
Ray

Re: parting 72 chevy c20 custom camper
 

If you will sell it seperatly, the A/C centre vent with the rear bracket that holds it in and the glove box door. How much via mail to Canada?

Re: parting 72 chevy c20 custom camper
 

Randy, how about the back wheels? 16.5 x 8.25? Also, how nice are the Custom Camper emblems? Thanks Trevor

Re: parting 72 chevy c20 custom camper
 

could you give me a price on gas petal assembly and rod to carb, and the visors look good are they, how much ?

Re: parting 72 chevy c20 custom camper
 

In line for the custom camper emblems.

Re: parting 72 chevy c20 custom camper
 

Hi Randy. I'll take sway bar and brackets. Interested in hubcaps and mirrors pending price. How much shipped to 75049?

Re: parting 72 chevy c20 custom camper
 

I'll take both fenders if they are gm fenders. Can you give me a pic of inside edge of fenders up top. Thanks..

Re: parting 72 chevy c20 custom camper
 

I would be interested in exhaust heat shield and pipe. shipped to 82210
Thanks
Rock C

Re: parting 72 chevy c20 custom camper
 

Hi Randy - pending knowing your price, I'd like the NL2 Aux Fuel Tank switch and attached harness. How much would you like for it shipped to 93555?

Re: parting 72 chevy c20 custom camper
 

Hi Randy,

Interested in hood and front bumper and doors, also rear wheels maybe if Trevor passes. These would fit in the K20 :)

Jud

Re: parting 72 chevy c20 custom camper
 

What would you price all automatic linkage parts to include pedal assembly (I am doing a 3 speed to auto swap) and automatic crossmember shipped to 29307? What condition is the A/C in?

Re: parting 72 chevy c20 custom camper
 

How much for the Ignition switch, door locks and glove box lock with key(s)?

Re: parting 72 chevy c20 custom camper
 

Ray, it wasn't running. Lift brackets $12, water neck $5, not sure if original carb, I'll get numbers when I get it off $30 for it, oil filler $20, all plus shipping

Already Gone, chrome is worn on the center vent like most, $12 plus shipping to Canada on it. Glove box door is not original for truck, its a 4x4 spid label, $12 plus shipping for it

Trevor, they are the wide 16.5 ones, $40 for pair with tires, or $50 without tires, cost me $5 each to get them dismounted. I'll check out emblems, its missing one I think

Youey, gas pedal, cable and carb bracket $30, visors $20, all plus shipping

mx289, your in line on emblems

bobvilla67, $50 for sway bar setup. Hubcaps $30 for the 3. Mirrors are good, well one has bent arm but I have another good arm $40 for set. All plus shipping

Nick, I'm real sure they original, but they have been painted

RockC, I was going to pm you, it has some rust. I have another one on the other truck too

jocko, I don't think its original switch but I will look

Jud, you can have hood. Front bumper has a hole for a fog light I think, but will check it out. Pass door is good but has speaker hole. Drivers door has some outside corner rust

Karl, $30 for AT linkage, $20 for AT brake pedal, $25 for AT crossmember all plus shipping. The outer AC box is sold already

Thanks Randy

Re: parting 72 chevy c20 custom camper
 

Up Grade, I don't think it has the ign switch in it
Thanks Randy

Re: parting 72 chevy c20 custom camper
 

PS pump/brackets/hoses and PS box sold locally

Re: parting 72 chevy c20 custom camper
 

Randy, I'll take the rear wheels for $50 / no tires. Keep me posted on emblems. Trevor

Re: parting 72 chevy c20 custom camper
 

Randy, I will take parts. Let me know total shipped. Sorry zip is 75043. Thanks Bobby

Re: parting 72 chevy c20 custom camper
 

Randy What about the rest door and glove box lock with key(s)?

Re: parting 72 chevy c20 custom camper
 

Randy- I'd be interested in the metal vacuum advance line if its available. Shipping is to 59044. Thanks-Ryan

Re: parting 72 chevy c20 custom camper
 

If BobVilla backs out on the sway bar I'll take it.
Would you sell the mounting clips for the tailgate trim and the center piece over the handle?
Also looking for tail light trim, I see the pass side is bad but driver looks good maybe?

MOD

Edit: Another thing, is the steel line for the brake booster still there? I would like that too...