The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   Gettin er done (https://67-72chevytrucks.com/vboard/showthread.php?t=66903)

FRENCHBLUE72 08-31-2003 08:34 PM

Gettin er done
 
1 Attachment(s)
Gonna strip out the interior and dupilcolor bedliner it monday. Hopefully I will get the interior done before winter get's here.. Today I replaced all the heater control's,heater core,blower motor and restior's just need the heater duct's for defrost.

FRENCHBLUE72 08-31-2003 08:37 PM

1 Attachment(s)
Pic two

FRENCHBLUE72 08-31-2003 08:39 PM

1 Attachment(s)
3RD PIC

FRENCHBLUE72 08-31-2003 08:42 PM

1 Attachment(s)
Last one for today.

1970blazin 08-31-2003 10:04 PM

What is duplicolor bedliner? Is it like Rattleguard? Post some pics as you do it or when it is done. I am going to Line-x the interior and bed of my blazer, but it is so much $$, I am thinking I might want to do something a little bit cheaper if it has good results. Let us know! Lots of pics!!

FRENCHBLUE72 09-01-2003 03:55 PM

1 Attachment(s)
rear area stripped out of seat's and stereo.. The stuff in the can is duplicolor... Are the plate's welded to the floor stock???? The plate's were actually welded and then bondoed smooth to the floor?????

1970blazin 09-01-2003 07:59 PM

All the ones I've seen are welded to the floor. Lookin' good!

Phillip Johnson 09-01-2003 09:16 PM

Pass on Line X.. They screwed up my Dodge Cummins so bad I sold the truck. Chipped, pealed, discolored. $500 and a POS bed. I made good when I traded it in. i put a plastic bedliner over it. My advice to everyone is STAY AWAY FROM LINE X. They dont stand behind their product. Lifetime warranty is only good until it fails. Then they say that the life must be over. For the record, it was the LINE X dealer in CHICO Calif..Owner Dave Pierce.. A real stand up guy....NOT!
:bs: :bs: :bs: :bs: :bs: :barf: :barf: :barf:

FRENCHBLUE72 09-01-2003 11:48 PM

1 Attachment(s)
Stripped all the old paint off the green paint must have been made from kriptonite cause it was use'in up the flap disk's on the grinder..Cleaned the bed with degreaser(thinner) and went for it..

FRENCHBLUE72 09-01-2003 11:51 PM

1 Attachment(s)
Used the duplicolor in a spray can to make sure I got all the knook's and cranny's. Also make sure that you tape up all hole's you want to put bolt's in,cause it is a pain to get this stuff off..

FRENCHBLUE72 09-01-2003 11:54 PM

1 Attachment(s)
Here is the professional liner roller.. Real easy to do and it only take's an hour to dry.

FRENCHBLUE72 09-01-2003 11:55 PM

1 Attachment(s)
Done this pic is front to rear.

FRENCHBLUE72 09-01-2003 11:58 PM

1 Attachment(s)
And rear to front.. This is 2 coat's .. Teusday I will go over and make sure I did not miss any spot's. It was getting dark and light was miminal so I prob missed some spot's.

NuBomb 09-02-2003 12:39 AM

Looking Good. I have decided to just paint my interior instead of using the bedliner stuff. Yours is looking really good though. I can't wait till I can show some progress pics. Seeing people getting things done on their's makes me want to get to work.

HatGuy 09-02-2003 08:47 AM

You are an inspration.

VTKidder 09-02-2003 09:39 AM

That's one stylin' driver seat!! Looks like a real low-riding lean-backer. :D

1970blazin 09-02-2003 12:07 PM

That looks great! Nice job!! Well worth it eh? I can't seem to talk my husband out of Line-x, I think we could do a good job with something like you went with. Oh welll its just $$ right:rolleyes:

Yukon Jack 09-03-2003 02:04 PM

Looks really good!


All times are GMT -4. The time now is 07:05 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com