The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2 of 15 1 2 3456712 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   PA So 1 more 72 blazer going under the knife (https://67-72chevytrucks.com/vboard/showthread.php?t=699579)

1rippen6 03-02-2016 03:41 PM
Re: So 1 more 72 blazer going under the knife
 
Quote:
Originally Posted by ochre 72 (Post 7506438)
I'm interested in the fuel filler neck cover. How much would shipping be to 30114
Will get you a quote this evening

Quote:
Originally Posted by dutchmanz (Post 7506442)
looks like a double wall top. What shape is it in? Mine was involved in some storm damage last week and may not be worth fixing...
I have 2 decent tops setting in the yard 250 without a hatch I don't have any decent hatches

Quote:
Originally Posted by Heliarcn (Post 7506476)
Interested in the parchment seat belts pending pictures. Also interested in the parchment door panels pending pictures.
Will get you pictures tonight none of it is good shape

Quote:
Originally Posted by 29od1 (Post 7506499)
How much for the bucket seat cross brace shipped to 67210?
Thanks,
David
Sorry David wish I had 100 of them promised this one back to the guy I bought the blazer off of

Quote:
Originally Posted by Ridnhi (Post 7506557)
How is the inside of the tailgate? I need a gate to repair mine.
Will get you pictures tonight but I know the bottom is gone if that is what you are looking for

k5blazin 03-02-2016 08:01 PM
Re: So 1 more 72 blazer going under the knife
 
Interested in the fan shroud if it's not damaged!

1rippen6 03-02-2016 10:20 PM
Re: So 1 more 72 blazer going under the knife
 
5 Attachment(s)
Quote:
Originally Posted by MikeCofield (Post 7505800)
And how much on the hump
High hump is 29 for shipping luggage rack is complete no broken pieces will need rechromed to be nice 80 plus shipping I should have taken a picture of the high hump but no issues no bad rust or pitting.

1rippen6 03-02-2016 10:24 PM
Re: So 1 more 72 blazer going under the knife
 
2 Attachment(s)
Quote:
Originally Posted by stick72 (Post 7506078)
I would be interested in the tailgate seals, mine are pretty bad. Zip is 37064

Thanks
These are pretty bad also look at pictures if still interested I can get you a quote

1rippen6 03-02-2016 10:27 PM
Re: So 1 more 72 blazer going under the knife
 
1 Attachment(s)
Quote:
Originally Posted by richard2717 (Post 7506091)
How is the rear floor around the wheel tubs, any rust thru? I need about 4-6" past the tubs on both sides for one of my projects and at least one more tub.
There may be some usable pieces there but will have to give me a couple of days to get that far on disassembly. Would you still be interested in the wheel tub if it has roll bar holes?

1rippen6 03-02-2016 10:28 PM
Re: So 1 more 72 blazer going under the knife
 
3 Attachment(s)
Quote:
Originally Posted by Ta12sec (Post 7506098)
How's the grill surround?
Grill has dents the whole way around it.

1rippen6 03-02-2016 10:32 PM
Re: So 1 more 72 blazer going under the knife
 
3 Attachment(s)
Quote:
Originally Posted by jimer1964 (Post 7506115)
Hi, Interested in the visors can you put up some pictures when you get time? Thanks
I washed both sides the each on has some staining on one side. It may clean up with some good cleaner like spray 9 but don't know the only thing I used was comet. There is a rip on the one next to the mounting bracket.

1rippen6 03-02-2016 10:34 PM
Re: So 1 more 72 blazer going under the knife
 
1 Attachment(s)
Quote:
Originally Posted by bluek5 (Post 7506172)
How is the passenger door, inner grille?
Pictures of the cracks

1rippen6 03-02-2016 10:35 PM
Re: So 1 more 72 blazer going under the knife
 
2 Attachment(s)
Quote:
Originally Posted by Beau2a (Post 7506201)
Do you have the cam and return spring from the hatch handle? Zip is 98116
Here you go

1rippen6 03-02-2016 10:36 PM
Re: So 1 more 72 blazer going under the knife
 
Quote:
Originally Posted by ochre 72 (Post 7506438)
I'm interested in the fuel filler neck cover. How much would shipping be to 30114
Shipping is 14 let me know if still interested.

stick72 03-02-2016 10:37 PM
Re: So 1 more 72 blazer going under the knife
 
Thanks for checking on the seals, mine are in slightly better shape

1rippen6 03-02-2016 10:40 PM
Re: So 1 more 72 blazer going under the knife
 
5 Attachment(s)
Quote:
Originally Posted by Heliarcn (Post 7506476)
Interested in the parchment seat belts pending pictures. Also interested in the parchment door panels pending pictures.
The 2 females have bad staining as you can see the 2 retractables are decent but the cover on the long one is bad. The one female buckle is broken if still interested make me an offer on the belts. Door panels are very chalky DS no extra holes PS plenty of extra holes if interested will be very cheap.

1rippen6 03-02-2016 10:43 PM
Re: So 1 more 72 blazer going under the knife
 
5 Attachment(s)
Quote:
Originally Posted by Ridnhi (Post 7506557)
How is the inside of the tailgate? I need a gate to repair mine.
Inside not so good outside a little better

richard2717 03-02-2016 11:10 PM
Re: So 1 more 72 blazer going under the knife
 
Quote:
Originally Posted by 1rippen6 (Post 7507235)
There may be some usable pieces there but will have to give me a couple of days to get that far on disassembly. Would you still be interested in the wheel tub if it has roll bar holes?
No rush here. As long as the mounting flanges are good and not beat all up I can work with the extra holes. Would all depend on price and I could wait till you come to va this summer if needed

Beau2a 03-02-2016 11:31 PM
Re: So 1 more 72 blazer going under the knife
 
I'll take it.

1rippen6 03-02-2016 11:32 PM
Re: So 1 more 72 blazer going under the knife
 
Quote:
Originally Posted by k5blazin (Post 7506980)
Interested in the fan shroud if it's not damaged!
Looks nice 125 if still interested will remove and get some pictures and send me your zip and I can get a shipping quote.

Heliarcn 03-03-2016 12:53 AM
Re: So 1 more 72 blazer going under the knife
 
Quote:
Originally Posted by 1rippen6 (Post 7507257)
The 2 females have bad staining as you can see the 2 retractables are decent but the cover on the long one is bad. The one female buckle is broken if still interested make me an offer on the belts. Door panels are very chalky DS no extra holes PS plenty of extra holes if interested will be very cheap.
I'll pass on the seatbelts and door panels. Thanks for the pics.

k5blazin 03-03-2016 08:46 AM
Re: So 1 more 72 blazer going under the knife
 
Quote:
Originally Posted by 1rippen6 (Post 7507361)
Looks nice 125 if still interested will remove and get some pictures and send me your zip and I can get a shipping quote.
Yes shoot me a couple of pics please .shipping to 13676. Thanks

1rippen6 03-03-2016 09:11 AM
Re: So 1 more 72 blazer going under the knife
 
Quote:
Originally Posted by k5blazin (Post 7507701)
Yes shoot me a couple of pics please .shipping to 13676. Thanks
I have a guy coming to listen to the engine run tomorrow evening I will remove after that and get some pictures.

Ta12sec 03-03-2016 10:11 AM
Re: So 1 more 72 blazer going under the knife
 
How are the tail light and gate bezels?

1972 Jimmy 03-03-2016 12:23 PM
Re: So 1 more 72 blazer going under the knife
 
Dwayne,
What shape is the gas tank mounting hardware in?? (U Bolts, Brakets and straps) Also, Would you be willing to cut off the gas tank filler neck?
Thanks,
Eric

craneboy72 03-03-2016 01:41 PM
Re: So 1 more 72 blazer going under the knife
 
Like to get in line for the filler neck cover

flashed 03-03-2016 01:48 PM
Re: So 1 more 72 blazer going under the knife
 
I may have missed it ,but are you selling the emblems ,Blazer ,etc ? They dont have to be nice ,looking for an upcoming table top project .

1rippen6 03-03-2016 01:50 PM
Re: So 1 more 72 blazer going under the knife
 
Quote:
Originally Posted by flashed (Post 7508038)
I may have missed it ,but are you selling the emblems ,Blazer ,etc ? They dont have to be nice ,looking for an upcoming table top project .
Yep for sale do you what 2 K5blazer and 2 8-350 why I'm asking is I have a couple already removed I will sell can get pictures.

1rippen6 03-03-2016 01:58 PM
Re: So 1 more 72 blazer going under the knife
 
Quote:
Originally Posted by Ta12sec (Post 7507788)
How are the tail light and gate bezels?
Will look tonight

Quote:
Originally Posted by 1972 Jimmy (Post 7507938)
Dwayne,
What shape is the gas tank mounting hardware in?? (U Bolts, Brakets and straps) Also, Would you be willing to cut off the gas tank filler neck?
Thanks,
Eric
I had a guy ask about 1 a month ago so I pm'd him Tuesday if he passes or doesn't respond in a couple of days will let you know.

Quote:
Originally Posted by craneboy72 (Post 7508029)
Like to get in line for the filler neck cover
I gave him a quote if he doesn't respond in a couple of days your next.


All times are GMT -4. The time now is 01:00 PM.
Page 2 of 15 1 2 3456712 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com