The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 1 of 4

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=205)

- - Started With This (https://67-72chevytrucks.com/vboard/showthread.php?t=442320)

cap n crunch

01-23-2011 04:51 PM

Started With This

5 Attachment(s)

This is the start of my build,

alwaysbroken

01-23-2011 05:01 PM

Re: Started With This

WOW thats a hell of a build u got goin.

cap n crunch

01-23-2011 05:02 PM

Re: Started With This

2 Attachment(s)

Started on the frame first

BC Toy chest

01-23-2011 06:57 PM

Re: Started With This

Wow ! Got your work cut out for ya. Well It's really not work it's more like fun, lol. Looking forward to seeing more pics as your fun progresses.

RootBeer 6117

01-23-2011 07:48 PM

Re: Started With This

Nothing like starting from scratch, Looks like fun. Good luck!
Joe

cap n crunch

01-23-2011 09:05 PM

Re: Started With This

5 Attachment(s)

Mustang II with bags

cap n crunch

01-23-2011 09:10 PM

Re: Started With This

3 Attachment(s)

A few more pics

cap n crunch

01-24-2011 07:54 PM

Re: Started With This

2 Attachment(s)

Got rid of all this

cap n crunch

01-24-2011 07:59 PM

Re: Started With This

4 Attachment(s)

Ended up with this..........

cap n crunch

01-25-2011 07:32 PM

Re: Started With This

3 Attachment(s)

Master Series Coating on frame, From this................

Kabwe

01-25-2011 07:34 PM

Re: Started With This

Well I for one think you are doing great one piece at a time. Isn't that how we all do it? Great job man and keep up the good work.

cap n crunch

01-25-2011 07:35 PM

Re: Started With This

2 Attachment(s)

To this...................

cap n crunch

01-25-2011 07:38 PM

Re: Started With This

Thanks Kabwe

cap n crunch

01-25-2011 07:46 PM

Re: Started With This

5 Attachment(s)

This all has to go..............

cap n crunch

01-25-2011 07:59 PM

Re: Started With This

4 Attachment(s)

Coming back together..............

Kabwe

01-25-2011 08:06 PM

Re: Started With This

Looks like a little more work has been done than one piece at a time. Great job

cap n crunch

01-25-2011 08:16 PM

Re: Started With This

1 Attachment(s)

Out with this.....

cap n crunch

01-25-2011 08:17 PM

Re: Started With This

1 Attachment(s)

And this.....

cap n crunch

01-25-2011 08:22 PM

Re: Started With This

3 Attachment(s)

Wow thats a big hole.........

cap n crunch

01-25-2011 08:28 PM

Re: Started With This

5 Attachment(s)

I built these to fill that big hole in............

cap n crunch

01-25-2011 08:35 PM

Re: Started With This

1 Attachment(s)

Built a little trans tunnel and the back half of the floor board. The blue color is rust converter, it turns black after couple hours. Not the best pic

cap n crunch

01-26-2011 06:19 PM

Re: Started With This

5 Attachment(s)

I thought these were interesting pics....................

troy54gmc

01-26-2011 06:39 PM

Re: Started With This

Wow capt, frame looks great and cab is a miracle restoration job. looks like that cab was sittin at the bottom of the ocean. great job on the metal fab you got skills.:metal: Hey question on your front mount on the parralel bars is it just welded on the one bracket? or is braced and just cant see it in the pictures? Oh ya one more question, what did you get the 9" rearend out of. It looks less wide than mine. mine is 65" from outside axle to outside axle.

cap n crunch

01-26-2011 07:59 PM

Re: Started With This

Quote:

Originally Posted by troy54gmc (Post 4440488)

Thanks troy54gmc. Those brackets are from Full Tilt http://www.fulltiltstreetrods.com/ they are actually bolted on then gusseted on the inside of the frame. I boxed the frame around them. The 9" is out of an early 80's F@#d truck. I cut it down and got axles from Mosier with the 5 on 4.75 bolt circle. It's around 60" flange to flange, can't remember exactly.

Kabwe

01-27-2011 08:50 PM

Re: Started With This

Man I thought I did a lot of rust repair, but it looks like you ended up making your own cab. Great job by the way.

All times are GMT -4. The time now is 01:42 AM.

Page 1 of 4

Show 40 post(s) from this thread on one page