The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988-1998 GMT400 Chevy & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=11)
-   -   NY edelbrock shorty direct replacment headers (https://67-72chevytrucks.com/vboard/showthread.php?t=800830)

sweetk30 02-06-2020 06:30 PM

edelbrock shorty direct replacment headers
 
1 Attachment(s)
i have a set of edelbrock chrome / nickle plated manifold replacment shorty headers i have had for years . they were used for mockup before i got them . someone cut the connector bar between the ports . these have not been run as far as i can tell .

they have the driverside o2 port . its plugged now but the plug was installed with copper anti-seize so it should come right out .

the finish is NOT the best or like new but there solid units .

they have a C.A.R.B tag on them for you cali guys . there for NON fresh air port systems . so no plumbing to hook up a smog pump . EDELBROCK HEADER - CATALOG #6566
for 1988-1995 Pick-Up 5.0L, 5.7L V8 TBI without A.I.R. &
1992-1995 Suburban, Blazer, Tahoe, Jimmy, Yukon, 5.0L, without A.I.R


looking for 125.00 + s/h to you via fedex ground .

20 bucks extra i have 2 custom waterjet cut flanges to make duel exhaust or custom exhaust y-pipe nubs with for 2.5" pipe o.d. and 2 new gaskets .

jcw 09-13-2020 02:00 AM

Re: edelbrock shorty direct replacment headers
 
are these headers still availble?


All times are GMT -4. The time now is 08:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com