The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   1961 C30 Brakes (https://67-72chevytrucks.com/vboard/showthread.php?t=810137)

SBPage1 08-04-2020 05:44 PM

1961 C30 Brakes
 
2 Attachment(s)
My C30 right rear brake kept locking up. I finally took it apart and found that it was missing the self adjusting lever and associated hardware! UGGGH!! I know that parts for the rear brakes are impossible to find, especially the adjuster lever. Anyone have any idea where I can get one? It’s a HO74 rear end if that makes any difference.

62c30 08-04-2020 11:26 PM

Re: 1961 C30 Brakes
 
Not sure on the brake parts I know they are hard to find. I swapped in a 14 bolt and it bolted right in place on my 62 c30 so it would be easy to get parts.

tchevs 08-09-2020 12:39 AM

Re: 1961 C30 Brakes
 
I have used 14 bolt brakes in a HO72 rear end before. The backing plates bolt right in place of the HO72 backing plate. By doing this i was able to use the drums off the 14 bolt. On another note, not sure if this helps but i had a 62 half ton that didnt have that hardware, the 12 bolt stuff fit right on the HO32 brakes. I would check to see if the hardware from a 14 bolt fits?

Tony

SBPage1 08-09-2020 03:02 PM

Re: 1961 C30 Brakes
 
Many thanks TChevs! Learned something new. Before I go the way of the 14 bolt, I’m experimenting with some C20 hardware to see if it works. Ordered it up from RockAuto. Is there any “years” of 14 bolt that work better or all the same?

Joe P 08-09-2020 05:32 PM

Re: 1961 C30 Brakes
 
Quote:

Originally Posted by SBPage1 (Post 8787120)
My C30 right rear brake kept locking up. I finally took it apart and found that it was missing the self adjusting lever and associated hardware! UGGGH!! I know that parts for the rear brakes are impossible to find, especially the adjuster lever. Anyone have any idea where I can get one? It’s a HO74 rear end if that makes any difference.

I have the same setup on my K20 - HO72 Rear with 13 inch drum. Rock Auto has a hardware kit that is inexpensive and includes the lever. If your drums are good then the kit is the best way to go. Drums are available too but big $$.

SBPage1 08-09-2020 07:01 PM

Re: 1961 C30 Brakes
 
OK...thanks!! Just found them for a 13 in drum and ordered the last two. Went ahead and ordered the left as well. Appreciate you!


All times are GMT -4. The time now is 06:56 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com