Re: Power Brake Booster Adapter Bracket
 

I have no idea what the mounting stud pattern is on that booster that they are using. The '67-'70 boosters are one of the boosters that are compatible with all of my booster brackets. The '71 & '72 boosters have a different mounting stud pattern and require slight elongation of the holes in my booster brackets.

Re: Power Brake Booster Adapter Bracket
 

I have a question about your bracket, I have an original type booster on my truck now with the step down style bracket that attaches to the firewall. With your bracket is the rod that goes to the brake pedal at an angle?

Re: Power Brake Booster Adapter Bracket
 

That will depend on whether you install it in the original hole in the pedal or drill a new hole for a better ratio. I would say that in the original hole it should be fairly straight.

Re: Power Brake Booster Adapter Bracket
 

Will I have any trouble with the automatic shift linkage on the steering column as far as clearance issues with the booster? do you have any pictures of it installed on a column shift truck? Thanks

Re: Power Brake Booster Adapter Bracket
 

If you use your original booster or one the same size, it will interfere with the column shift linkage. You will need to use a booster with a diameter less than about 10". No I do not have any installed pics other than what members have posted in this thread.

Re: Power Brake Booster Adapter Bracket
 

Ok, thanks. The Wilwood setup I'm going to use has a 8" booster so it should work out.

Re: Power Brake Booster Adapter Bracket
 

Bracket arrived today and the fit and finish are the best I have seen. Thank

Re: Power Brake Booster Adapter Bracket
 

Thank you for the compliment. :D

Re: Power Brake Booster Adapter Bracket
 

Captain, I would like one of your brackets for my '70 c/10 in black powder coat, how do I pay you? Thanks, Jason

Re: Power Brake Booster Adapter Bracket
 

Payment sent via PayPal for 67-72 brake booster bracket in powdercoat satin black, thanks, Jason

Re: Power Brake Booster Adapter Bracket
 

Recieved bracket today, looks great. Hopefully I'll get it and my new master/booster installed next week, thanks

Re: Power Brake Booster Adapter Bracket
 

Posting so I can find again. Nice work

Re: Power Brake Booster Adapter Bracket
 

Thanks for the previous reply. Sorry to keep questioning you but getting parts from the USA to here is expensive so i want to make sure things will work if I buy them. Frank (vendor Pickemup ) in Olympia is selling this master/booster proportioning valve combo and I'd like to use it in conjunction with you bracket. In Post 2/3 of this thread the booster you how hanging on your bracket seems to be the same as the one in the attached pic of Franks so am I to assume Franks will work will your bracket. I have 1972 C10 350/350 with factory original power brakes.

Re: Power Brake Booster Adapter Bracket
 

The booster and master assembly you show in that picture, will bolt right up to your firewall since it is an original replacement assembly. No additional bracket is needed. My booster brackets are typically used with nonstock boosters to get everything closer to the firewall. Additionally, my booster brackets are not compatible with a column shifted auto trans unless the booster is smaller than about 10" in diameter. If you do want to eliminate the factory brackets and get everything closer to the firewall, the booster mounting holes will have to be elongated if that is an original style '71-'72 booster.

Re: Power Brake Booster Adapter Bracket
 

Thanks for the info. My idea was to use smaller booster ( this one is 9 inches ) and get it right up to the firewall. Sounds like I should just use the above setup the way it is.

Re: Power Brake Booster Adapter Bracket
 

I'll throw in a pic of mine after I got it all buttoned up. Looks so much better tucked in toward the firewall.

Re: Power Brake Booster Adapter Bracket
 

Thanks and yes they look so much better close to the firewall.

Re: Power Brake Booster Adapter Bracket
 

I would be happy to sell you one of my booster brackets. I just wanted you to understand that you will not be using any part of those factory mounting brackets. That will end up costing you more money than just buying a compatible booster and master cylinder locally along with my booster bracket.

Re: Power Brake Booster Adapter Bracket
 

Captain, it looks like your bracket might cure a clearance issue I'm having with my 68 K10. My new intake and carb setup isn't working with the stock 11" booster location and I'm looking for a solution that would allow me to mount a smaller diameter booster closer to the firewall.

Will your bracket help me to accomplish that goal?

If so, what booster and master cylinder do you recommend I use with your bracket. I converted the front axle to disc brakes and have the correct proportioning block. My truck has a floor shifted automatic.

Re: Power Brake Booster Adapter Bracket
 

I replied to your PM. :)

Re: Power Brake Booster Adapter Bracket
 

Hi - looking for one of these black power coated sent to 44001 -

Re: Power Brake Booster Adapter Bracket
 

I will send you a PM with ordering and payment info.

Re: Power Brake Booster Adapter Bracket
 

Can you send me ordering and pricing info on a black powdercoated brake booster bracket. I will give you a Montana address for shipping. I will need it in Montana by June 15th.

Re: Power Brake Booster Adapter Bracket
 

I will send you a PM with ordering info. The prices are exactly the same as in post #1 of this for sale thread.

Re: Power Brake Booster Adapter Bracket
 

I will be on vacation from 08-08-16 thru 08-25-16. If you wish to make a purchase you can post here in this for sale thread, send me a PM or an email to captainfab454@hotmail.com. I will reply to your inquiry when I return on the 25th. I do currently have a list of orders to build and ship when I return but I will add your name to the list in order of when received. Thanks for your understanding.