C-10 LS swap package: Atlanta GA
Apologies for the long post, but this idea just hit me, and this is kind of a feeler post.
I swapped a low mile 04 LQ9 and 4L80 into my 69 C10 in 2010. I drove it a bit but went to work overseas for a couple of years. Dad drove the truck occasionally to keep fuel fresh. Came home with the intention of working on a body restoration, but the cab/bed were too far gone. Ended up swapping a 50 1/2 ton body onto the C10 frame. Added an MP112 supercharger. Drove the truck maybe 1000 miles after this due to life stuff (school, new job, moving) and because, frankly, it just made too much power for the chassis. Anyway, things are settling down more now, and I have new projects in mind. I'm taking the truck in a different direction, and I thought I'd use the LQ9/4L80 in my Roadmaster, but I pulled the drivetrain out of the truck this week and there are just a lot of C10-specific parts that I'd hate to separate. I'm starting to think someone might benefit from buying this stuff as a package deal, and it would save me from dealing with a bunch of listings/sales. That's a very long way of me saying I'm considering selling all of the below as a package deal. 2004 LQ9 - 60,000 miles in 2010, probably 5k miles since swap - Stock 317 heads with LS6 springs - LS6 cam - CTS-V oil pan - Truck accessory setup with alternator, PS pump, new water pump, factory crank pulley with ARP bolt - Low mount AC bracket (can't remember who made it), no compressor - No intake (blower was sold a couple of months ago) 2004 2wd 4L80e - can't recall mileage, but I was seeking low mileage stuff when buying these parts, so probably less than 100,000 Doug Thorley LS swap headers - ceramic coat began to flake on these a while ago, so they look pretty rough. Wideband bung welded in. - rest of exhaust including Magnaflow mufflers turned down before rear axle can also go. ECE LS swap engine mounts PSI conversion harness (new in 2018, replaced the messy harness I made myself) - For GENIII truck and 4L80E - ECU included Driveshaft for 4L80 to 12 bolt rear ECE stainless steel under bed fuel tank - 19 gallons - includes fuel pump and -8 feed -6 return braided stainless fuel lines I need to work on price, but I wanted to put this out there while I had some time to write things out. No interest in splitting up at the moment. Will update with pictures and price soon, but feel free to reach out in the meantime. UPDATE 1/19 $3500 is the package price, retail for everything listed was around $5500 Pickup in Atlanta, GA only at the moment Should have pictures this weekend |
Re: C-10 LS swap package: Atlanta GA
I might be of interest for everything except the fuel tank.
Send me a PM. Thanks Posted via Mobile Device |
Re: C-10 LS swap package: Atlanta GA
Interested in the fuel tank.
|
Re: C-10 LS swap package: Atlanta GA
id be interested in the driveshaft if its a shortbed and also the fuel tank as a package deal
|
Re: C-10 LS swap package: Atlanta GA
Put my name in the ring for the tank with shipping to 68122
|
Re: C-10 LS swap package: Atlanta GA
Sorry for the delay, guys. I went out of town right after I made the post.
I've updated the post with a price ($3500), and I'm limiting the sale to local pickup only. If I decide to break up the package, I'll ship most items, but I'll make separate posts in this forum for each item. Currently, that's not the plan. |
Re: C-10 LS swap package: Atlanta GA
I sent you a PM.
Thanks Posted via Mobile Device |
Re: C-10 LS swap package: Atlanta GA
Pics?
|
Re: C-10 LS swap package: Atlanta GA
I sent you a question
|
Re: C-10 LS swap package: Atlanta GA
I’ll take the ECE LS swap mounts if they’re still available.
|
Re: C-10 LS swap package: Atlanta GA
Are any of these items for sale? Or
Is the whole add a scam??" Posted via Mobile Device |
All times are GMT -4. The time now is 03:49 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com