Dropped Cup LCA's
ok guys, here it is
I'm back from see'n my brother & bag'n the front of my truck I took a lot of pics, so I'm not gonna post em all... Here is a link Ima skip the disassembly & start with the good stuff Cut'n the bump stop off http://67-72chevytrucks.com/gallery/...7_08100006.jpg http://67-72chevytrucks.com/gallery/...7_08100011.jpg Bolt the upper plate to the bag & mock it up http://67-72chevytrucks.com/gallery/...7_08100017.jpg http://67-72chevytrucks.com/gallery/...7_08100013.jpg Made the lower cup http://67-72chevytrucks.com/gallery/...7_08100021.jpg http://67-72chevytrucks.com/gallery/...7_08100022.jpg http://67-72chevytrucks.com/gallery/...7_08100023.jpg http://67-72chevytrucks.com/gallery/...7_08120001.jpg http://67-72chevytrucks.com/gallery/...7_08120005.jpg |
Re: Lower A-arm ???
Mocked up the lower cup & A-arm, so we could trace where to cut
http://67-72chevytrucks.com/gallery/...7_08120011.jpg http://67-72chevytrucks.com/gallery/...7_08120012.jpg http://67-72chevytrucks.com/gallery/...7_08120015.jpg Cut'n out http://67-72chevytrucks.com/gallery/...7_08120017.jpg http://67-72chevytrucks.com/gallery/...7_08120019.jpg We leveled the cup to the bottom edge of the A-arm http://67-72chevytrucks.com/gallery/...7_08120020.jpg http://67-72chevytrucks.com/gallery/...7_08120021.jpg http://67-72chevytrucks.com/gallery/...7_08120022.jpg |
Re: Lower A-arm ???
Drilled a hole it the cross member & put a grommet in for the hose to run through
http://67-72chevytrucks.com/gallery/...7_08120035.jpg http://67-72chevytrucks.com/gallery/...7_08120037.jpg Bag installed for good http://67-72chevytrucks.com/gallery/...7_08120040.jpg http://67-72chevytrucks.com/gallery/...7_08120041.jpg http://67-72chevytrucks.com/gallery/...7_08120054.jpg http://67-72chevytrucks.com/gallery/...7_08120055.jpg My temp for airing them up http://67-72chevytrucks.com/gallery/...7_08120044.jpg http://67-72chevytrucks.com/gallery/...7_08120058.jpg |
Re: Lower A-arm ???
Bolting up the lower A-arm
http://67-72chevytrucks.com/gallery/...7_08120063.jpg Putting it all back together http://67-72chevytrucks.com/gallery/...7_08120065.jpg http://67-72chevytrucks.com/gallery/...7_08120067.jpg http://67-72chevytrucks.com/gallery/...7_08120069.jpg http://67-72chevytrucks.com/gallery/...7_08120072.jpg http://67-72chevytrucks.com/gallery/...7_08120075.jpg http://67-72chevytrucks.com/gallery/...7_08120076.jpg |
Re: Lower A-arm ???
Done :metal: :metal: :metal:
http://67-72chevytrucks.com/gallery/...7_08120082.jpg http://67-72chevytrucks.com/gallery/...7_08120083.jpg http://67-72chevytrucks.com/gallery/...7_08120084.jpg http://67-72chevytrucks.com/gallery/...7_08120085.jpg http://67-72chevytrucks.com/gallery/...7_08120086.jpg http://67-72chevytrucks.com/gallery/...7_08120088.jpg http://67-72chevytrucks.com/gallery/...7_08120090.jpg |
Re: Lower A-arm ???
I couldn't get a pic of it aired out on teh ground, because my brothers air compressor didn't have the umph to get my truck up very high :(
But here it is on the trailer http://i81.photobucket.com/albums/j2...7_08120101.jpg http://i81.photobucket.com/albums/j2...7_08120102.jpg It may go a little lower, but it's sitting on the swivel for the winches hook And it's just about to hit the headers & bind the upper ball-joint Here are some more pics of it at ride & dump... No notch in the rear & no drop spindles http://i81.photobucket.com/albums/j2...8_02090003.jpg http://i81.photobucket.com/albums/j2...8_02090002.jpg http://i81.photobucket.com/albums/j2...2Image0040.jpg |
All times are GMT -4. The time now is 11:20 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com