Re: The Doc & Kim 69 build
4 Attachment(s)
Bling bling LOL ...now to put it all back together
|
Re: The Doc & Kim 69 build
2 Attachment(s)
Quote:
you got plenty more than me:) Im starting to like this powder coating my daughters Boy friend replaced this electric panel box so he brought it home for me:) ...we are going to make a big A$$ oven out of it. 5 high 3+ wide 20" deep |
Re: The Doc & Kim 69 build
Quote:
were gonna make a bigger hot box:devil: |
Re: The Doc & Kim 69 build
That is a great idea Jess !! How hot does the oven need to get to cure the powder coating out?
|
Re: The Doc & Kim 69 build
400 degrees ..I plan on using the elements/thermostats/glass/light etc. from my existing oven ..whats nice about the cabinet 2 doors easy in and out,(might be able to get trailing arms in it, although i sent mine out to the professional already) its thick gauge plenty room for racks. not sure how we will insulate it yet. I have a few ideas:)
|
Re: The Doc & Kim 69 build
1 Attachment(s)
took the 72 out today left a signature in the street my wife asked if i was going to grow up:) i said eventually....maybe
|
Re: The Doc & Kim 69 build
1 Attachment(s)
then i struggled with these.........
|
Re: The Doc & Kim 69 build
:lol: very nice :mm:
|
Re: The Doc & Kim 69 build
2 Attachment(s)
Cant help myself ....I bought these a while ago from a board who converted to coil over....they were scratched up pretty good sooooo here we go more shake and bake👀🙈 got one down to the metal tonight ...traveling tomorrow be back Friday get the other A arm prepped Saturday I also p coated the last spring tonight
|
Re: The Doc & Kim 69 build
2 Attachment(s)
I picked these up from p-coat yesterday
|
Re: The Doc & Kim 69 build
2 Attachment(s)
was able to put some powder on one drop spindle today, I'm pleased......
ill get the other done tomorrow continued prepping the control arms today they been a PIA to get all the old powder coat off |
Re: The Doc & Kim 69 build
You are doing a wonderful job powder coating your own stuff :mm:
|
Re: The Doc & Kim 69 build
thanks Larry.... its a little time consuming but rewarding in a few ways :)
|
Re: The Doc & Kim 69 build
Quote:
|
Re: The Doc & Kim 69 build
1 Attachment(s)
finally got one arm totally prepped
|
Re: The Doc & Kim 69 build
1 Attachment(s)
powdered
|
Re: The Doc & Kim 69 build
1 Attachment(s)
baked:)
|
Re: The Doc & Kim 69 build
You are doing some fine work with your powder coating system :mm: This is going to be one cool ride when it is completed :chevy:
|
Re: The Doc & Kim 69 build
thanks getting closer to reassemble ....and anxious
|
Re: The Doc & Kim 69 build
OK Jess, when are you going public with your great work on PCing, I've got some small parts that need your attention.....
|
Re: The Doc & Kim 69 build
not public:) but would be happy to do a few small parts for you
|
Re: The Doc & Kim 69 build
Quote:
|
Re: The Doc & Kim 69 build
2 Attachment(s)
finished the other lower C arm today so tomorrow i will see if i can install the ball joints without scratching them :)
|
Re: The Doc & Kim 69 build
Very nice work Jesse, this is going to look amazing. You can put them in without scratching them, I did it :chevy:
|
Re: The Doc & Kim 69 build
Thanks Larry .. I brought them to my friends shop we pressed them in all 3 of us LOLone holding the arm one positioning and me working the jack it was comical :) no scratches I'm pleased thanks again for the kind words
|
All times are GMT -4. The time now is 09:10 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com