The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Frame Vin (https://67-72chevytrucks.com/vboard/showthread.php?t=698262)

Crazy Rusty 02-17-2016 05:11 PM

Frame Vin
 
Is there any way to tell the whole vin from just a frame? I traded an old engine for supposedly a 65 c10 parts truck but onky have the frame. The vin on the frame starts with 5 but I'm wondering if it's a C20.

Had a hard time searching for this on the forum, my apologies if it's been answered already.

Thanks!

yelmer 02-17-2016 09:44 PM

Re: Frame Vin
 
is it a longbox frame ? all shortboxes are 1/2 ton, any other parts on it ?

Crazy Rusty 02-17-2016 10:29 PM

Re: Frame Vin
 
1 Attachment(s)
It's a long box, believe it was a fleet side. Took a few pics of the frame since I was comparing the suspension.

(Can only seem to upload one on my phone)

Classic v6 GMC's 02-17-2016 10:35 PM

Re: Frame Vin
 
Quote:

Originally Posted by Crazy Rusty (Post 7490191)
It's a long box, believe it was a fleet side. Took a few pics of the frame since I was comparing the suspension.

(Can only seem to upload one on my phone)

It is most likely a GMC frame because of the leaf springs but GMC's did not have vins on the frame.

yelmer 02-18-2016 12:19 AM

Re: Frame Vin
 
yep it is a gmc frame

Crazy Rusty 02-18-2016 01:13 AM

Re: Frame Vin
 
Any difference in the frame design? They look about the same though I haven't measured them yet though.

Captainfab 02-18-2016 02:04 AM

Re: Frame Vin
 
The '63-'66 chevy and '63-'66 GMC frames are basically the same and are interchangeable. The main difference is the leaf springs on the GMC. That and the lack of a VIN on the frame as Classic v6 GMC's said.

Quote:

Originally Posted by Crazy Rusty (Post 7490371)
Any difference in the frame design? They look about the same though I haven't measured them yet though.


Crazy Rusty 02-18-2016 02:16 PM

Re: Frame Vin
 
It definitely has a frame stamp so I'm going to assume its a 65 chevy frame with gmc suspension :)

jonzcustomshop 02-18-2016 02:49 PM

Re: Frame Vin
 
all you can tell from the frame vin, is the year, assembly plant, and serial #
http://67-72chevytrucks.com/vboard/s...d.php?t=316902

sampsmit000 02-18-2016 10:46 PM

Re: Frame Vin
 
If I'm not mistaken, don't the k10s have leaf springs. Mine 1964 chevy k10 has leaf springs on the rear. so yours may be a 4x4

Brad54 02-18-2016 11:41 PM

Re: Frame Vin
 
Heavy Duty suspension option on a Chevy was leaf springs.

-Brad

65 C20 02-19-2016 12:51 PM

Re: Frame Vin
 
My 65 Chev C20 has leaf springs on it.
However I don't believe that it has that red bar from frame to springs above the axel.
Do GMC's have that red Bar ?

jtrichard 02-19-2016 01:03 PM

Re: Frame Vin
 
"Do GMC's have that red Bar ? " NO that is an add-on torque bar


also from OP.... yes it was a step side from what can be seen of the rear bumper


And yes K10s had leafs front and rear (we cant see the front here)
But the rear spring hangers are NOT low enough to be 4X4

Gurutlgz6 01-26-2019 04:18 PM

Re: Frame Vin
 
I hav my frame numbers would like to know what year it is chevy frame 2z513193 some idea would be great
Posted via Mobile Device

66Gilbert 01-26-2019 09:35 PM

Re: Frame Vin
 
Quote:

Originally Posted by gurutlgz6 (Post 8451588)
i hav my frame numbers would like to know what year it is chevy frame 2z513193 some idea would be great
posted via mobile device

1962.


All times are GMT -4. The time now is 09:19 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com