Bucket Seats
 

Anyone put any newer bucket seats in a suburban? i have a 91 burban with bench seats and as nice as they are i don't like bouncing around in it I'd prefer buckets from like my 03 chevy, tried searching couldn't find much any help appreciated

Re: Bucket Seats
 

i found some van captain chairs that swivel around as well as slid and tilt but it sits not on brackets but basically a big circle are these seats possible to put in
Posted via Mobile Device

Re: Bucket Seats
 

Sounds like your typical "conversion" seats. Pretty common in the custom van, Suburban conversion days. Most of them just bolted to the floor. Some actually had plates on the bottom too, but not all.

Re: Bucket Seats
 

seems backwards to some but i have an 89 conversion burban and want to take out the buckcets up front and put in a bench

Re: Bucket Seats
 

i'm putting 4 buckets from an 03 silverado in my burb. I wanted to go that route because the seats have seat belts built in so i could shave the nasty ones hanging from the pillar. you have to channel the floorpan so the headrest is not scraping the ceiling, haha. They're not bolted in yet because the douche who had my truck for over a year just did the frame and suspension, everything else looked like hammered dog ass.

oh yeah, if you do go with 4 buckets like i did, be careful, there are appx. 14,000,000,000 different colors and patterns, and they're all just a tiny bit different, hahaa

Re: Bucket Seats
 

http://i92.photobucket.com/albums/l3...b/IMG_7697.jpg

you can't see it real well because of the primer, but he had to cut channels into the floor pan to sink the seat down a little.

Suburban bench to bucket seat conversion
 

I actually got 2 of the 4 seats put in and where the seat belt clicks in is bolted to the seat and lines up perfectly with my original shoulder belts, swivel works great, dual armrests, a little more padding than regular buckets very pleased with using original bolt holes here's some pics more later this week

Re: Bucket Seats
 

jumbo can you get me a picture of how close your seat is to the ceiling like from the view of hood and inside it'd help me alot
Posted via Mobile Device

Re: Bucket Seats
 

i used seats from a 07 yukon seats are the same in all chevy gmc and cadillac trucks from 07-current

Re: Bucket Seats
 

i have no idea why the photos uploaded sideways, they are not saved like that in my computer. can anybody help?

Re: Bucket Seats
 

I fixed them for ya...

Re: Bucket Seats
 

How did you fix them?
Posted via Mobile Device

Re: Bucket Seats
 

well i just got some electric bucket seats from a 1995 silverado and they sit WAYYY to high...i tried insatlling my old brackets and they are too small...so those wont work. lol

Re: Bucket Seats
 

corey are you talking about just installing on the front only because the floor pan sits way taller or did you try back as well because my buckets are on about a 10in swivel pedestal in the rear and i got 8in of headroom-15in between the actual seats, 7in with armrests down and 1-1/2in between seat and door panel

Re: Bucket Seats
 

weather was nice out for once and no school so i decided to get the seats basically permanently in but couldn't find any grade 8 washers so i settled for cheap free ones for now drilled out the plug welds on body and used the nuts below them i decided to go that way because it has a reinforcing plate for the original bench

Re: Bucket Seats
 

just front seats. i think ill just have my front cusions replaced so they can match the rest.

Re: Bucket Seats
 

yea i got lucky mine match my door panels but only problem is the passenger side i drilled about an inch off so the door only closes of the arm rests is up so gotta fix that today
Posted via Mobile Device