The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   recommendation for chrome shop? (https://67-72chevytrucks.com/vboard/showthread.php?t=780334)

parb 01-27-2019 07:59 PM

recommendation for chrome shop?
 
Hi,

i want to re-chrome the original nose badges on my 1972 GMC Jimmy. Its the three letters that spell out "GMC" attached to the hood.

I have polished them up and they look pretty good under artificial light, but when i take them out in full sun i can see that the chrome is so thin in places that the underlying metal shines through.

Any recommendations for a good chrome restore / rechrome shop?
These pieces are so small that the cost of shipping doesn't bother me.

thanks for any advice!

Getter-Done 01-27-2019 09:01 PM

Re: recommendation for chrome shop?
 
I 'm sub to this thread.
This place sounds good to me.
http://67-72chevytrucks.com/vboard/s...d.php?t=778276

There is also a place in Nashville, Tn. that has a good reputation.

https://www.shchrome.com/

DeadheadNM 01-27-2019 09:24 PM

Re: recommendation for chrome shop?
 
Electroplating of El Paso. I’ve used them several times. Good results good prices and reasonable turn around time.

parb 01-28-2019 11:50 AM

Re: recommendation for chrome shop?
 
Deadhead,

is this the shop? http://www.electroplatingelpaso.com/

You've used them yourself?

SeventyOne 01-28-2019 01:28 PM

Re: recommendation for chrome shop?
 
Par theres a shop in Hayward I just used for my CST panel strips and my bumpers. Pieces look great and have a 3yr warranty.

https://www.atbumpers.com/

parb 01-28-2019 03:10 PM

Re: recommendation for chrome shop?
 
Whats the address to the hayward shop? I sent my pieces for the nose to el paso. They quoted $118 to rechrome the parts (triple process).
But i think i may want to rechrome the interior trim pieces for the side upholstry on my jimmy (i think this chrome piece was only there in the CST edition).

SeventyOne 01-28-2019 04:40 PM

Re: recommendation for chrome shop?
 
Click the link above. It's just off Industrial.

4oldcars 01-29-2019 09:38 AM

Re: recommendation for chrome shop?
 
I too have used El Paso with no complaints.

DeadheadNM 01-29-2019 04:41 PM

Re: recommendation for chrome shop?
 
Quote:

Originally Posted by parb (Post 8452985)
Deadhead,

is this the shop? http://www.electroplatingelpaso.com/

You've used them yourself?

Yep. Easy to work with.

parb 01-31-2019 12:29 AM

Re: recommendation for chrome shop?
 
my nose logo arrived to their shop today. got a really reasonable quote from them to re-chrome. I hope to get the badge back in a week or two.

They where really nice to deal with. We should create a permalink with vendors we like to do business with. If i get quality back i would add this one to that list...

DeadheadNM 01-31-2019 10:42 PM

Re: recommendation for chrome shop?
 
1 Attachment(s)
Example finished bumpers...

richard2717 02-02-2019 12:54 PM

Re: recommendation for chrome shop?
 
x3 on ElPaso. Used them several times now and quite happy with results

72blzrWA 02-17-2019 11:06 PM

Re: recommendation for chrome shop?
 
I took a rally center cap into a local chrome shop and they basically laughed. Said for them to re-chrome it (but it would look really nice... real nice.) was $200. Each! We can buy driver quality or re-pops a lot less so that didn't make sense for me. Hate to waste these as they are solid just abused with someone's rattle can and slightly bubbled, but is it worth re-chroming? Is there anyone that would do a set for a little more than re-pops?

parb 02-17-2019 11:13 PM

Re: recommendation for chrome shop?
 
I think I paid $500 for all 4 to be rechromed. I was really happy with the result. I

72blzrWA 02-17-2019 11:41 PM

Re: recommendation for chrome shop?
 
Thanks, Was that the El Paso shop?

parb 02-17-2019 11:48 PM

Re: recommendation for chrome shop?
 
It was a local guy. Santa Cruz metal polishing.
Truthfully, I wasn't expecting him to rechrome them, he sent it out somewhere. I thought he was just going to help me with a dent and polish them.

He doesn't have much of a web page, is an older British guy. Super nice, but I the impression that this wasn't his typical gig.


All times are GMT -4. The time now is 01:24 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com