parting a 72 blazer 4x4
5 Attachment(s)
I'll be parting it out as soon as possible. Bought this thing with only a few pics and drove 4 hour round trip was supposed to have factory tach, factory bucket seats, and factory posi, but just my luck NONE of the above ANYWAY
I'll sell the rolling chassis with body, tranny, transfer, drive lines (no top) with title or I will part it out if any interest individual parts, $350 SOLD single wall top a few cracks but not real bad, hatch is junk $200 front outer bumper brackets $35 plus shipping console, couple extra holes on front-$40 plus ship-SOLD ps pump, pulley and brackets $40 plus ship-SOLD all motor pullies $36 shipped ALT brackets $31 shipped PS box $25 plus ship-sale pending door caps-$31 shipped-SOLD inner grill is nice $60 NO SHIP-SOLD steering column $40 plus ship-SOLD rear seat $60 no ship-SOLD See anything else ask and I'll price. I'm hopefully going to start parting this Sun and Mon if the wife lets me. Thanks Randy |
Re: parting a 72 blazer 4x4
5 Attachment(s)
822222
|
Re: parting a 72 blazer 4x4
5 Attachment(s)
877777777
|
Re: parting a 72 blazer 4x4
5 Attachment(s)
92222222
|
Re: parting a 72 blazer 4x4
5 Attachment(s)
97777777
|
Re: parting a 72 blazer 4x4
Any door caps Randy? I need a passenger side, but would take both.
|
Re: parting a 72 blazer 4x4
5 Attachment(s)
0100000001
|
Re: parting a 72 blazer 4x4
3 Attachment(s)
66666666666666
|
Re: parting a 72 blazer 4x4
How much for the tachometer, and any good blazer emblems? Eric
|
Re: parting a 72 blazer 4x4
I should ask about the 4 speed shifter for bruce. That is chrome, correct? And what is the condition of the trans case knob? Thanks.
|
Re: parting a 72 blazer 4x4
red71cheyenne, I'll check them out Sun
Toomuchstuff, Eric, I'll check those out Sun Thanks Randy |
Re: parting a 72 blazer 4x4
How much for the gas tank and coil shipped to 56085? Also, are the rear ends of the frame horns in good shape? I need from the rear cross member back if possible. I'm also looking for a 72 GMC pass fender and both inner fenders.
|
Re: parting a 72 blazer 4x4
How much for console and roll bar Randy? Thank you.
Posted via Mobile Device |
Re: parting a 72 blazer 4x4
Is the transfer case shift lever chrome and in good shape? How much? I don't need the knob too much stuff is interested in.
|
Re: parting a 72 blazer 4x4
I'll take the Chrome strips that run on top of the rails between the body and hatch.
Posted via Mobile Device |
Re: parting a 72 blazer 4x4
How much for the intake? Is the motor any good? Thanks, Daren
|
Re: parting a 72 blazer 4x4
passenger front seatbelt there? Will rear seatbelts come with the brackets they bolt to? (seat bracket) Willing to sell the hatch parts/latch/guts brackets on top separately including bolts/screws?
|
Re: parting a 72 blazer 4x4
how much for rear bumper brackets
How much for seat brackets (under the aftermarket buckets)? Thanks! |
Re: parting a 72 blazer 4x4
Hey Randy, looks like something I'd drag home! Last one I got that had "factory" buckets, had seats out of a 66 GTO. Dang the luck! I could use the rear top to body straps with the catches for the hatch if noboby else needs them. Thanks, Sharpie
|
Re: parting a 72 blazer 4x4
i am interested in the chrome shifter if it gets to me! also if it is for a sm465. thanks.
|
Re: parting a 72 blazer 4x4
is the wire whip for the dome lights in the top still there?
|
Re: parting a 72 blazer 4x4
Interested in:
1)Brake / Clutch pedal setup including all clutch linkages and springs , from pedal to throwout including engine ball, Zbar, frame mount, etc. 2)Rr bumper splash sheilds, I actually only need one side but I can't remember which till I can look again Mon 3)tranny hump - (4spd 4x4) This is for a frame off, so all parts would need to be good potentials for restoration. No rush, just let me know when you get a chance. Thanks, Jeff. Posted via Mobile Device |
Re: parting a 72 blazer 4x4
guys I'll try to get the stuff you all are asking about off today if possible and get you some better pics. if I don't get them off I'll atleast get you all some prices
Thanks Randy |
Re: parting a 72 blazer 4x4
Randy, I would be interested in the roll bar and console as well. What do the tires and wheels look like as well? Thanks Trevor
|
Re: parting a 72 blazer 4x4
Trevor, I have one guy ahead of you on console and roll bar but I don't know about shipping roll bar.
The 35 inch tires have good tread, but have weather cracks inside tread but hold air no problem, the wheels are supposed to be 10 inch wheels, they are not scarred up. I priced the tires and wheels to a guy here in town for $300, I don't think he has any money though. Thanks Randy |
All times are GMT -4. The time now is 06:09 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com