1980 flatbed cab n chassis frame
is it possible to put a regular bed on a cab n chassis would it bolt up or would you have to do some major work to fit the reg bed on the frame? :chevy:
|
Re: 1980 flatbed cab n chassis frame
If the cab and chassis frame has the same wheelbase as the pickup the bed came off of, then yes it will. You may have to drill mounting holes, I believe there are either 6 or 8 bolt holes in a long bed, very simple task.
|
Re: 1980 flatbed cab n chassis frame
nice yea I got a few extra parts laying around im driving the c30 and its about 7100 lbs with the flat bed so i was thinking of swapping the bed out i would have to put the humps on the longbed tho for the dual tires
|
Re: 1980 flatbed cab n chassis frame
I think a regular truck with an 8' bed is 56" from cab to center of axle and a Cab & chassis is 60" from cab to axle. So is you have a C&C then a bed will not just bolt right up.
|
Re: 1980 flatbed cab n chassis frame
i gotta check it out i haven't measured it thanks for the info guys really appreciate it
|
Re: 1980 flatbed cab n chassis frame
yes, dually chassis are longer than 8" box srws. my unvle learned the hard way making his pulling truck. out came the torch and welder. we fixed that problem.
Posted via Mobile Device |
Re: 1980 flatbed cab n chassis frame
I see thanks
|
All times are GMT -4. The time now is 09:08 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com