The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Tow Hooks (https://67-72chevytrucks.com/vboard/showthread.php?t=836864)

Is it true that there are crooks out there reproducing the tow hooks for our trucks? They found out what they are worth to us and now they want to profit from it. I read that the cheap knock offs aren't as strong as the original GM hooks. My question is, how are we to know if we are buying the real thing?

Post a pic if in doubt. They aren’t too hard to spot.

Quote:

Originally Posted by un4gvn! (Post 9108695)

So are the folks doing fenders,hoods dash pads etc crooks also...it's supply and demand
Problem is when people misrepresent the repops..like selling a fender as NOS.

Good conversation, like to see where this goes.

Thanks Russ

I think re-pop hooks are a special case. Just like repop wheels, they are a safety-related item. The difference is that wheels have to meet specific DOT standards to be able to be sold - repop hook sales are the wild wild west. If it was possible to have confidence that knockoff tow hooks had the same strength as the originals, I don't think this would be the controversial topic that it seems to be today (agreed, as long as they were not falsely advertised as originals - and priced like them). But there are indeed some knockoffs available that clearly advertise they are for display purposes only, so at least the ORIGINAL buyer knows they are fake - the problem is that the original mfgr does not also permanently mark them as 'display only' parts - so the next guy that picks them up at a rummage sale in 20 years won't have a clue.

Personally, I wish the knockoffs didn't exist, period. Demand signal should be no excuse for a safety-related item being produced for looks only. Someday, somewhere - someone is going to resell one and a buyer won't know that a hook isn't original or is for display purposes only, even if there is no PN on it - and someone will get injured - eventually. This is not a buyer beware scenario - it is a manufacturer responsibility from a safety perspective to ensure a display-only hook can never be mistaken as a real one - but of course buyers that buy them for looks only usually want them to be indistinguishable... As for someone making them in their garage, I personally could care less what printed proof of strength testing is provided, sorry, but it's kinda meaningless compared to a known, original hook, from a trusted mfgr, like GM (that clearly did sufficient engineering and/or research before offering them). That's just my personal opinion, I know there are different opinions out there - and I get it, there is clearly a market for several different approaches.
Off my soapbox, sorry :)

For the OP, there's a loooong thread on this subj already with lots of opinions - recommend do a search and you'll find tons of reading.

I seriously doubt that you could break one of the repos...think of all the cheap generic tow hooks on a million jeeps(aka the little chrome ones with the tab to hold the logging chain on)..we run a towing company here and I promise that we are rougher on cheap CHINESE
"J" hooks and chains etc. than anyone will ever be on these repo extreme bend hooks.
That claim to be forged and if that's the case you can rest assured you won't hear any instances of them failing...
The reality is that anyone spending the $400 to buy them is not going to the mud hole this weekend to pull their redneck buddies out and drink beer.. Rest assured they'll be one a nice truck for that factory look.
Just my 02

Quote:

Originally Posted by 52napco (Post 9108763)

So are the folks doing fenders,hoods dash pads etc crooks also...it's supply and demand
Problem is when people misrepresent the repops..like selling a fender as NOS.

The guys who have a NOS part and some how get the sticker off and put it on a cheap Chinese junk and ask for NOS price, yes he is a crook. I've seen it at swap meets with fenders. I don't think it's fare to ask for the same money the original hooks go for.

If you ever seen NOS parts, mostly large parts would have a small sticker from the corporation on it or it would come in a corporate box (GM, Ford, Chrysler).

Quote:

Originally Posted by un4gvn! (Post 9109067)

If you ever seen NOS parts, mostly large parts would have a small sticker from the corporation on it or it would come in a corporate box (GM, Ford, Chrysler).

sorry, i thought we were talkin about tow hooks

Quote:

Originally Posted by un4gvn! (Post 9109005)

Repo extremes are about $350

There would be no problem if no one paid the ridiculous amounts being asked for original hooks. As long as there are people willing to throw their money away like that, there will be others who are willing to help them do it in whatever way they can.

If I ever see a set of original hooks for $100 or less, i will buy them. Otherwise, they aren't worth it.

There cast not forged,so should be able to distinguish a difference

Capitalist- Someone that reproduces tow hooks.

Crook- Someone that misrepresents repo's as original.

Buyer-Should do his due diligence. A quick post of a picture of the hooks on here will get the answer.