The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=205)
-   -   57 Chevy Fleetside Build (https://67-72chevytrucks.com/vboard/showthread.php?t=506987)

usmc_butler 02-03-2012 12:36 PM

57 Chevy Fleetside Build
 
I have been planning on starting this build thread a couple of months ago when I started this project, however procrastination got the best of me! As everyone always says better late then never. I little back ground on the truck, ive owned it since 1995. When I was 15 I saved up my money bought this out of a field with no bed for 75 bucks. I worked on it and drove it in high school with a 283 3 speed on the column, straight axle and little to no brakes, until I could afford to upgrade to a sub frame and auto tranny. Up until that point I had no idea cars/trucks were so easy to drive:lol:! Anyway like all of my friends time passed life went on and she sat for years while I deployed a couple times married a couple times, etc. Now I am set to where I have funds, steady life and a son that I would like to pass it down to one day. Until then I would like to get it road worthy so we can spend some time together, maybe some cruises so he can have some memories like I have had in it. Without further ado here she is:

http://i81.photobucket.com/albums/j2...157f94127e.jpg


http://i81.photobucket.com/albums/j2...e98599e9e4.jpg

http://i81.photobucket.com/albums/j2...r/IMG_5177.jpg


http://i81.photobucket.com/albums/j2...r/IMG_5175.jpg


http://i81.photobucket.com/albums/j2...r/IMG_5179.jpg

This is just a few lots more pictures to come...

Daze57 02-03-2012 12:45 PM

Re: 57 Chevy Fleetside Build
 
good lookin truck !- interesting tailights -- best of luck on the build -keep us posted -and if ya got questions ; this is the forum to ask .

usmc_butler 02-03-2012 12:46 PM

Re: 57 Chevy Fleetside Build
 
These were taken the first night I got it in the shop, with no hesitation we proceeded with the tear down process:

http://i81.photobucket.com/albums/j2...r/IMG_5181.jpg

http://i81.photobucket.com/albums/j2...r/IMG_5184.jpg

http://i81.photobucket.com/albums/j2...r/IMG_5186.jpg

http://i81.photobucket.com/albums/j2...r/IMG_5189.jpg

http://i81.photobucket.com/albums/j2...r/IMG_5195.jpg

http://i81.photobucket.com/albums/j2...r/IMG_5197.jpg

http://i81.photobucket.com/albums/j2...r/IMG_5201.jpg

http://i81.photobucket.com/albums/j2...r/IMG_5204.jpg

http://i81.photobucket.com/albums/j2...r/IMG_5215.jpg

pinecrest 02-03-2012 12:51 PM

Re: 57 Chevy Fleetside Build
 
Where'd the frame come from?

usmc_butler 02-03-2012 12:56 PM

Re: 57 Chevy Fleetside Build
 
Here is the new Pro Street frame that will she will ride on with fresh paint. I decided to smooth the firewall and relocated the battery box to the rear above the rear end.


http://i81.photobucket.com/albums/j2...r/IMG_6084.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6083.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6085.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6087.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6149.jpg

Finally got done fishing the new 00 gauge battery cable through the boxed frame.

http://i81.photobucket.com/albums/j2...r/IMG_6151.jpg

usmc_butler 02-03-2012 01:06 PM

Re: 57 Chevy Fleetside Build
 
http://i81.photobucket.com/albums/j2...r/IMG_6141.jpg

Just got these back from having them Powder coated

http://i81.photobucket.com/albums/j2...r/IMG_6167.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6152.jpg


Still lots of work to do finishing up the firewall..

http://i81.photobucket.com/albums/j2...r/IMG_6159.jpg

New Fuel Cell with Sealer inside. (note to self never use a hole saw to drill the fuel neck!)

http://i81.photobucket.com/albums/j2...r/IMG_6171.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6172.jpg

Front cab mounts in place with the new "RE" relocated master cylinder

http://i81.photobucket.com/albums/j2...r/IMG_6179.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6180.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6181.jpg

usmc_butler 02-03-2012 01:13 PM

Re: 57 Chevy Fleetside Build
 
Fuel Tank mounted with filter and lines

http://i81.photobucket.com/albums/j2...r/IMG_6276.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6258.jpg

Mock up battery

http://i81.photobucket.com/albums/j2...r/IMG_6259.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6260.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6277.jpg

Machine shop redrilled new pickup rotors for car pattern, Wilwood brake pads and 2 1/2" lowering spindles.

http://i81.photobucket.com/albums/j2...r/IMG_6272.jpg

usmc_butler 02-03-2012 01:15 PM

Re: 57 Chevy Fleetside Build
 
Mock up with body on and fitting body lines...

NOT GOING TO WORK....

http://i81.photobucket.com/albums/j2...r/IMG_6204.jpg

Little Better but not right yet...

http://i81.photobucket.com/albums/j2...r/IMG_6214.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6217.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6218.jpg

usmc_butler 02-03-2012 01:21 PM

Re: 57 Chevy Fleetside Build
 
Got rid of the front roll pan that I installed in the 90's! and test fitting the bumper and brackets:


And yes the bumper is mounted upside down, I liked the looks of it better...

http://i81.photobucket.com/albums/j2...r/IMG_6339.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6340.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6341.jpg


Powder coated core support filler panel

http://i81.photobucket.com/albums/j2...r/IMG_6346.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6347.jpg

usmc_butler 02-03-2012 01:29 PM

Re: 57 Chevy Fleetside Build
 
NEW stuff Mr. UPS brought me!

http://i81.photobucket.com/albums/j2...r/IMG_6349.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6350.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6352.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6380.jpg

Filling in the cab corner holes

http://i81.photobucket.com/albums/j2...r/IMG_6403.jpg

http://i81.photobucket.com/albums/j2...r/IMG_6404.jpg

Working on insulation and yes I am using the Lowes "Peel & Seal" this is the best stuff ever!


http://i81.photobucket.com/albums/j2...r/IMG_7135.png

sgtusmc 02-03-2012 01:33 PM

Re: 57 Chevy Fleetside Build
 
WOW, looks great man!

Kim57 02-03-2012 02:31 PM

Re: 57 Chevy Fleetside Build
 
Welcome
Very cool build. Keep the pics coming.
Kim

usmc_butler 02-03-2012 02:49 PM

Re: 57 Chevy Fleetside Build
 
Here is something I had made for the new radiator, I have it powder coated now I will have updated pictures later:

http://i81.photobucket.com/albums/j2...r/IMG_7150.jpg

http://i81.photobucket.com/albums/j2...r/IMG_7149.jpg

usmc_butler 02-03-2012 02:51 PM

Re: 57 Chevy Fleetside Build
 
Quote:

Originally Posted by pinecrest (Post 5163938)
Where'd the frame come from?

The frame was out from under a 68 chevy SNB truck.

usmc_butler 02-03-2012 02:56 PM

Re: 57 Chevy Fleetside Build
 
My plan is to build this and drive it to the Stray Kat 500 in Dewey, Ok on May 4th, 5th 6th then tear it down for paint and fixes.

_Ogre 02-03-2012 03:46 PM

Re: 57 Chevy Fleetside Build
 
great googley moogley!
now that's a frame :D:D:D
i'm liking this one...

Rednek13x 02-03-2012 09:11 PM

Re: 57 Chevy Fleetside Build
 
Great build so far!
Cant wait to see more

Maximus 02-03-2012 09:40 PM

Re: 57 Chevy Fleetside Build
 
Woah that things a monster!! I love the way the fleets look! and (no offense to you 58-9 lovers) im partial to the 55-57 front end. Best of both worlds!!!!!

I'm assuming this wont be a work truck lol...

jimig1 02-03-2012 10:51 PM

Re: 57 Chevy Fleetside Build
 
How did you mount your gas pedal I have one just like it.

Daze57 02-03-2012 11:45 PM

Re: 57 Chevy Fleetside Build
 
^ x 2- i would like to know that also

Rods57 02-04-2012 01:37 PM

Re: 57 Chevy Fleetside Build
 
Great looking build, cant wait for more pics of how you finish off the inside of the bed.

Rods57 02-04-2012 02:21 PM

Re: 57 Chevy Fleetside Build
 
What is the radiator out of? looks like it fits great.

usmc_butler 02-06-2012 10:06 AM

Re: 57 Chevy Fleetside Build
 
Quote:

Originally Posted by jimig1 (Post 5164995)
How did you mount your gas pedal I have one just like it.



Quote:

Originally Posted by Daze57 (Post 5165096)
^ x 2- i would like to know that also


It fit kind of weird due to the shortness of the assembly and the way the firewall turnes. Ill take some pictures, but it turned out fantastic and works great!

usmc_butler 02-06-2012 10:25 AM

Re: 57 Chevy Fleetside Build
 
Quote:

Originally Posted by Rods57 (Post 5165998)
What is the radiator out of? looks like it fits great.

It fit good, other then having to fab the upper bracket, it is a cross flow out of a 70's impala, I believe...

http://i81.photobucket.com/albums/j2...r/IMG_7265.jpg

http://i81.photobucket.com/albums/j2...r/IMG_7266.jpg

http://i81.photobucket.com/albums/j2...r/IMG_7267.jpg

http://i81.photobucket.com/albums/j2...r/IMG_7268.jpg

usmc_butler 02-06-2012 10:34 AM

Re: 57 Chevy Fleetside Build
 
Here are some pictures of my wire hooks and insulation that I did this weekend.

http://i81.photobucket.com/albums/j2...r/IMG_7273.jpg

http://i81.photobucket.com/albums/j2...r/IMG_7274.jpg

http://i81.photobucket.com/albums/j2...r/IMG_7275.jpg


All times are GMT -4. The time now is 03:28 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com