Front end Swap
Hi All,
I want to convert to disc brakes and install drop spindles. I have a C20 (8 Lug). I was told the best and cheapest way to get this done is to install the front end off of a 73 -87 chevy truck as it will have disc brakes. I found this close by me on craigslist but its from a GMC - does anyone know if this will bolt right up like I've heard it should? Thanks! https://losangeles.craigslist.org/lg...347904242.html |
Re: Front end Swap
They should be the same.
Jimmy |
Re: Front end Swap
Quote:
I paid $50 for the 3/4 ton and $100 for the 1/2 ton. |
Re: Front end Swap
$300 and a bunch of rust? Pass.
Go look at a couple of wrecking yards and find a good donor. Then make the deal. |
Re: Front end Swap
Quote:
|
Re: Front end Swap
Just did this not too long ago on my 62 c20. Had to drill a couple new holes and elongate a couple more, but pretty straightforward. I managed to pick up the complete setup with power steering box for $200 and thought I got a pretty decent deal.
|
Re: Front end Swap
Something to help you along. http://www.67-72chevytrucks.com/vboa...d.php?t=357610 Offer him $100 and see where that goes. It will probably need to be rebuilt anyway.
|
Re: Front end Swap
Quote:
Side note...just got back from visiting San Francisco last week, what a great city! |
Re: Front end Swap
Quote:
|
Re: Front end Swap
Thanks for the responses, everyone. Can I use my stick power steering components if I do this swap or do I have to change that out too?
|
Re: Front end Swap
Quote:
|
All times are GMT -4. The time now is 01:28 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com