The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   west coasties (https://67-72chevytrucks.com/vboard/showthread.php?t=625500)

Kingjasn 04-17-2014 10:47 PM

west coasties
 
I'm gonna be putting some west coast mirrors on my 65 pretty soon, and I am wondering if anyone has any advice or experience with a certain brand that might help me. The backs of the mirrors will be powder coated satin black, so the finish won't matter, and I like the Jr. coasties. I have looked at some on top banana, and a couple other sites, but I just like feedback first. Thanks for any help.

Jason

rideblue00 04-18-2014 05:24 AM

Re: west coasties
 
Well heres my 2 cents, i have the full-size tall original ones on my c20 and they are big, sometimes a hinderance for certain sight lines when pulling up to some intersections when roads are at an angle to each other, but just have to get used to looking around them. The jr's i think are shorter and would be better, but i think they look weird. Going to try the small round ones sometime.

Woogeroo 04-18-2014 05:40 AM

Re: west coasties
 
Quote:

Originally Posted by rideblue00 (Post 6634477)
Well heres my 2 cents, i have the full-size tall original ones on my c20 and they are big, sometimes a hinderance for certain sight lines when pulling up to some intersections when roads are at an angle to each other, but just have to get used to looking around them. The jr's i think are shorter and would be better, but i think they look weird. Going to try the small round ones sometime.

I concur... ya go to look left/right and you have to lean forward/backward to make sure there is no one in behind the mirror when you are looking. It takes some getting used to in a pickup.

You can still find OEM ones used if you keep an eye out.

There are a few threads about them in the 60-66 FAQ Index in the Mirrors category that you may want to check out.

-W

TJ's Chevy 04-18-2014 10:54 AM

Re: west coasties
 
2 Attachment(s)
Here's the JR Coast Mirrors on my 66..got them from Classic Parts...and here are the ones on my 64..they have been on there since the truck was almost new. Both are great. :chevy:

19666Trucker 04-19-2014 01:55 AM

Re: west coasties
 
1 Attachment(s)
I got the round spot mirrors at Napa there black to so the match your west coast, the get all th blind spots. I just the mirrors off of Amazon.

TJ's Chevy 04-19-2014 11:04 AM

Re: west coasties
 
Quote:

Originally Posted by 19666Trucker (Post 6635792)
I got the round spot mirrors at Napa there black to so the match your west coast, the get all th blind spots. I just the mirrors off of Amazon.

Could I have the part number on those spot mirrors from Napa? I'm interested in a pair. Thanks.

64shortbox 04-19-2014 03:59 PM

Re: west coasties
 
5 Attachment(s)
Subscribed - I need to find a set of west coast mirrors for my 64. I just bought a 28 foot travel trailer with a 14' slide out and I can't see worth a darn out my little mirrors. Not only that my 350 doesn't want to pull it too well. Good thing I have a 72 472 Caddy motor on its way. The small 1/2 ton rear end isn't going to hold up too long either so I'm going to have to pick up a 9" rear out of a 61 - 72 Ford truck for it.
I just got the engine compartment looking good and my wiring all straightened out, all the transmission & motor oil leaks fixed just to pull it all out ands tart over again.

TJ's Chevy 04-19-2014 04:13 PM

Re: west coasties
 
Sounds like your gear ratio might be a little tall. It should be fine...more cubic inches will help though. :chevy:

Clyde65 04-19-2014 06:32 PM

Re: west coasties
 
)4shortbox, you just need to change the gears, I have a 65, with a small v8, 4speed auto with 3.73's and I pull my 15' travel trailer just fine. One thing I would suggest is rear airbags!!

Kingjasn 04-19-2014 09:04 PM

Re: west coasties
 
Dad's 65 had the coasties on it new, and that was the truck I learned to drive in. Are the Jr. coasties you guys have experience with about the same size?

19666Trucker 04-19-2014 09:29 PM

Re: west coasties
 
Quote:

Originally Posted by t.j. Mccauley (Post 6636050)
could i have the part number on those spot mirrors from napa? I'm interested in a pair. Thanks.

#97802

19666Trucker 04-19-2014 09:42 PM

Re: west coasties
 
#97872 stainless, the other is black

TJ's Chevy 04-19-2014 10:24 PM

Re: west coasties
 
Quote:

Originally Posted by 19666Trucker (Post 6636801)
#97802

Quote:

Originally Posted by 19666Trucker (Post 6636822)
#97872 stainless, the other is black

Thanks! :chevy:


All times are GMT -4. The time now is 04:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com