The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)
-   -   59 apache bag questions (https://67-72chevytrucks.com/vboard/showthread.php?t=616622)

4Eyedtruck 02-14-2014 08:28 PM

59 apache bag questions
 
hey everyone im ready to start ordering parts for my suspension and try and get some angles and ride height figured out and need some help ive searched until my eyes have bugged out and might be over looking it so on to the questions.

1. what cup height are most people running on the camaro subframe or should i buy the tallest cup and cut them down till i am happy ?

2. what bag would you all recommend with the bigblock ive heard good things about slam specialties should i go 6 or 7 inch bag

3 in the rear i was planning on running a sleeved firestone f9000 bag with under the axle bracket kit and a cnotch from cpp is their anything wrong with that bag and setup ?

I appreciate any help i can get or insight this is my first airride build and its all new to me

andrewmp6 02-16-2014 03:45 AM

Re: 59 apache bag questions
 
If your not looking to lay frame,I would use ridetech shockwaves in the front.Its bolt in and you get a bag and shock so no having to relocate the shocks.The rear depends what type of 4 link you use but both are good if used right.

4Eyedtruck 02-16-2014 04:09 AM

Re: 59 apache bag questions
 
I know id like to use the shockwaves to but man they are so expensive and i have other areas that extra little bit could go to as well and thank you for taking the time to answer I swear im going crazy trying to figure stuff out in my mind lol im going to get it done though it has now become a QUEST lol


All times are GMT -4. The time now is 11:26 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com