W&G remover
Hey guys
What is everyone using for W&G remover. Water based ? Solvent based ? Both ? Windex :) |
Re: W&G remover
I get mine from oreillys..masterpro...
I guess its solvent based.. https://www.oreillyauto.com/detail/b.../4510944?pos=0 |
Re: W&G remover
Quote:
Assume works good. |
Re: W&G remover
It works good...but it less than $20 a gal that I pay..I usually buy all my stuff through a jobbers account
|
Re: W&G remover
Oh thats not bad.
It was quoting me $45 + tax. Do you only use a solvent based W&G remover ? |
Re: W&G remover
That's the only brand I've ever used...
I hate the way they price stuff at oreillys...shows how much of a markup there is on stuff.. |
Re: W&G remover
Check your local auto paint supplier.....should be no more than $20-$25 a gallon for solvent based.
|
Re: W&G remover
Quote:
Quote:
do you guys ever use a water based W&G remover as well as a solvent based ? |
Re: W&G remover
I wasnt even aware there was water based until you asked..
|
Re: W&G remover
Check with SPI, they have both and list the uses for both.
https://www.southernpolyurethanes.com/misc |
Re: W&G remover
Quote:
|
Re: W&G remover
Quote:
Its actually where I am getting my W&G remover from ..... just deciding if I need the water based. So just looking for some real world experience etc. |
Re: W&G remover
DX 330 is all I have used in the last say 20 some years.
|
Re: W&G remover
I use Prep-all now, it is solvent-based and I get it from the local paint shop. I tried a water-based before. It worked, but wasn't very good at cleaning, especially with wax/tar. If it was a clean surface, it would make it ready for paint. I didn't have any issues with adhesion.
I am an amateur and I am interested in other replies, so don't read too far into my experience. |
Re: W&G remover
I use SPI’s waterborne. Be sure to allow ample time for it to flash off before application of primer or paint.
|
Re: W&G remover
Quote:
|
Re: W&G remover
I go down to a local body shop with my 1 gallon container along with a case of beer so I don't know how much it costs. They buy it in bulk but I do believe it's solvent based. They spray PPG products.
|
Re: W&G remover
Haha...sounds like it's the same cost as a case of beer..
|
Re: W&G remover
Quote:
Do you get to sit there and help share/consume the payment, or is it a drop and go?? :lol: |
Re: W&G remover
Friday's about 4:30 I seem to get the best deal. And yes a couple of cold ones after breathing sanding dust all day makes the beer taste real good.
|
All times are GMT -4. The time now is 10:31 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com