The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today! (https://67-72chevytrucks.com/vboard/showthread.php?t=401176)

AusTx68 05-09-2010 10:32 PM

Re: What did you do to your truck today!
 
Went to visit my truck at the body shop. It's been gone for 2 months now and I'm going crazy! I didn't have time to really tune it before getting it running and taking it to the shop. At 31 seconds you can hear the cam but the idle is a little slow. I pulled the PS belt off just before dropping it off. Makes for fun in tight spaces.


wwotr 05-09-2010 11:05 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by AusTx68 (Post 3967268)
Went to visit my truck at the body shop. It's been gone for 2 months now and I'm going crazy! I didn't have time to really tune it before getting it running and taking it to the shop. At 31 seconds you can hear the cam but the idle is a little slow. I pulled the PS belt off just before dropping it off. Makes for fun in tight spaces.

http://www.youtube.com/watch?v=ZaXSWKJmiJE

I feel your pain. Mine was in the Body Shop from Mid October 09 thru Mid January 2010. I visited with it, 2x a week and took pictures/video and documented it on my website.
Lucky thing was , it was durring the middle of Winter.

Jaysonb 05-10-2010 12:30 AM

Re: What did you do to your truck today!
 
1 Attachment(s)
Got passenger side cab coner done, and shot it with epoxy:metal:

1968CHEVYC10 05-10-2010 12:59 AM

Re: What did you do to your truck today!
 
pull the cover off my rear diff, drained it and bought new oil and a gasket. gonna get some gasket glue tomorrow and finish it up.http://hphotos-snc3.fbcdn.net/hs580...._2187151_n.jpg

GruntMoanCough 05-11-2010 12:37 AM

Re: What did you do to your truck today!
 
2 Attachment(s)
Bought a console for the '72 from Craigslist, 'course, now I need the buckets to go with it :rolleyes:.

jhwkns 05-11-2010 01:14 AM

Re: What did you do to your truck today!
 
I installed my new sport bumper.

http://i486.photobucket.com/albums/r...rimered003.jpg

Sublvr72 05-11-2010 06:04 AM

Re: What did you do to your truck today!
 
I unloaded my new 454 from my trailer into my garage

panhandler62 05-11-2010 08:04 AM

Re: What did you do to your truck today!
 
Got this bit almost done.. waiting for the rotors and brackets to show up to finish it off.

http://67-72chevytrucks.com/vboard/a...1&d=1273438824

flashed 05-11-2010 09:46 AM

Re: What did you do to your truck today!
 
All I did is drive it.

oldblue1968chevy 05-11-2010 09:53 AM

Re: What did you do to your truck today!
 
nice truck jhwkns! need to polish up those slots! and get door handles and lenses!!

OhioDan 05-11-2010 09:56 PM

Re: What did you do to your truck today!
 
Finished rebuilding the front suspension. Installed new spindles. Lubed frontend, installed tires, and got it back on the ground. Now to get it aligned.

RustyDan 05-12-2010 12:45 AM

Re: What did you do to your truck today!
 
I did nothing to my 72 c10 longhorn, Except I DROVE it 900 miles round trip to Vegas and back...
Does that even count?
Oh yea...She ran like a top!

bowtiedriver2 05-13-2010 03:16 PM

Re: What did you do to your truck today!
 
I started rebuilding the carb yesterday and just ordered my Jeep coil springs today. Time to drop it and get it on the road. I would say "roadworthy" but that is a llloooonnnnggg stretch. But driveable is a start... :sexy:

8mpg 05-13-2010 03:40 PM

Re: What did you do to your truck today!
 
I cut in a CPP cnotch...still need to drill holes. I somehow mananged to break a brand new titanium Bosch 1/2" drill bit. And now Im arguing about the strength of the notch and getting attacked by Shane for some reason?

basemodel67 05-14-2010 12:53 AM

Re: What did you do to your truck today!
 
I ordered a blower hole cover to go along with my heater delete.:metal: Also got a gauge panel from an old conversion van... I have an idea I'm working on.:smoke:

petey-pablo 05-14-2010 03:56 AM

Re: What did you do to your truck today!
 
I changed my tranny fluid/filter today and redid driver side valve cover that was leaking and yesterday I changed the motor oil. Now it will sit till sunday till I buy fluids for it.

ilovnos 05-14-2010 05:23 AM

Re: What did you do to your truck today!
 
Put in radiator support, heaadlight buckets after having them powdercoated. Cleaned up some wiring, put fender back on. Will finish up tomorrow.

Lippyp 05-14-2010 06:02 AM

Re: What did you do to your truck today!
 
I did some cleanup work on the camper to/cap, collected the new timber from the wood yard for it (bottom rails that it sits on are rotten) and then got dragged into gardening. That said I've been cleaning up under my new tarp garage that the truck will live in as soon as the cap is repaired, cleaned up the weeds between the 200 odd year old cobbles in there so it should be a bit dryer and cleaner.

http://i7.photobucket.com/albums/y29...k/S6001647.jpg

http://i7.photobucket.com/albums/y29...4042010002.jpg

http://i7.photobucket.com/albums/y29...4042010004.jpg

This is the before picture!

http://i7.photobucket.com/albums/y29...4042010001.jpg

http://i7.photobucket.com/albums/y29...k/24042010.jpg

This week the wheels are going off to have the tyres refitted with new valves as three out of the four go down over the space of a couple of weeks, then hopefully I'll find some time to drain the five year old gas out of the tank and replace it with fresh. Then I'm ordering a new battery and starter.

stevencvn72 05-14-2010 08:42 AM

Re: What did you do to your truck today!
 
Blew a tire with a nail. Not repairable. Time for new rims and tires!

72TXSuperCheyenne 05-14-2010 10:03 AM

Re: What did you do to your truck today!
 
3 Attachment(s)
Well, not all today, but over the past week or so with a little (well a lot) of help.

Installed EPWI 1.6/1.5 roller rockers.
Installed Edelbrock aluminum valve covers.
Ran, cut, constructed boots, and installed MSD Street zero resistance plug wires.
New belts and hoses all around.
New SFI 29.1 fly wheel.
Installed N&N Air Filter.

Tomorrow - installing 700R4, level 3 transmission.
installing switch on factory A/C so compressor does not run all the time.

coming up next few weekends:
New cab mounts.
Front suspension rebuild, ball joints, bushings, tie rods,
1" spacer between carb and intake manifold
run new fuel line from fuel pump to carb

Rob H. 05-14-2010 05:46 PM

Re: What did you do to your truck today!
 
I put a "new" to me glove box in my 67, it was one of two that came with the 70 GMC 'burb we just hauled home. Started taking out the 4 speed in the burb to put into my 67. No I didn't take pics LOL.

TXRANGER 05-14-2010 10:48 PM

Re: What did you do to your truck today!
 
I installed a ECE hidden hitch setup on my 71. My 8 year old son was the perfect assistant to get the job done. It took a few hours to get the holes drilled but it turned out really cool.

kyle fitz 05-14-2010 10:54 PM

Re: What did you do to your truck today!
 
re-installed my heater controls and boxes. with new heater core

Rat Bastid 05-14-2010 11:08 PM

Re: What did you do to your truck today!
 
well i hung new doors and fenders last week and had to walk away for a day or so.....went up today and removved fenders loosened cab bolts,ssquared up the cab, was a 1/2 in out sheesh......aligned doors so they close smoothly now and rehung fenders,got body lines i can live with,now for some new hood hinges and shims and will test fit hood and and install grill surround...see how in lines up then lol......have a good weekend fellas

profe56 05-15-2010 01:57 AM

Re: What did you do to your truck today!
 
I almost finished the manual to automatic tranny 700r4, the last thing I did was the holes for the croosmember and then conect the TV cable, then drove it and I just noticed the big difference. I still having things to fixing like emergency brake cable, speedometer cable, carpet but I'm on the way.


All times are GMT -4. The time now is 09:48 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com