The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)
-   -   My 63 SWB BBW Build Frank (https://67-72chevytrucks.com/vboard/showthread.php?t=691690)

NVS-C10 05-19-2016 02:21 PM

Re: My 63 SWB BBW Build Frank
 
Quote:

Originally Posted by Captainfab (Post 7595730)
Your truck is coming together nicely :thumbs:

Quote:

Originally Posted by CRGRS 66 (Post 7596302)
Frank is coming along great! Subscribed

Thanks!!!

NVS-C10 05-19-2016 07:20 PM

Re: My 63 SWB BBW Build Frank
 
Finished up the power steering conversion today with Captainfab steering shaft adapter.. just need hoses and done!

http://i279.photobucket.com/albums/k...ps088bu87q.jpg

NVS-C10 05-19-2016 07:23 PM

Re: My 63 SWB BBW Build Frank
 
This weekend I should be doing brake lines, fuel lines, finish wiring, then exhaust on Tuesday!!!

C1ph3r 05-19-2016 09:50 PM

Re: My 63 SWB BBW Build Frank
 
thanks for bringing you build to my attention. I am really leaning towards CPP since I can get it all local. Place up the road carries pretty much everything.

Maybe Charlie Brown will be accepting of the parts and my curse thus far can be lifted. Great build and thank you for documenting it so well.

Oh and adorable kiddo BTW.

NVS-C10 05-23-2016 12:40 PM

Re: My 63 SWB BBW Build Frank
 
Got the front sheet metal hung this weekend... still need to bolt up grill and front trim.

Here's a pic before Frank was loaded up this morning, off to the exhaust shop!

http://i279.photobucket.com/albums/k...psxhmmjl3k.jpg

ACORVET 05-24-2016 01:23 AM

Re: My 63 SWB BBW Build Frank
 
are you installing a tilt steering column? If so, can you share the details? I have a 62 and am wanting to do a tilt with column shift. Any guidance is appreciated!

NVS-C10 05-24-2016 02:23 AM

Re: My 63 SWB BBW Build Frank
 
Quote:

Originally Posted by ACORVET (Post 7603208)
are you installing a tilt steering column? If so, can you share the details? I have a 62 and am wanting to do a tilt with column shift. Any guidance is appreciated!

No tilt.. just standard steering column

62stepside longbox 05-24-2016 02:24 AM

Re: My 63 SWB BBW Build Frank
 
Lookin sharp:metal:

NVS-C10 05-24-2016 02:25 AM

Re: My 63 SWB BBW Build Frank
 
Quote:

Originally Posted by 62stepside longbox (Post 7603226)
Lookin sharp:metal:

Thanks!

NVS-C10 05-25-2016 06:00 PM

Re: My 63 SWB BBW Build Frank
 
Where else do you take a classic truck to get exhaust.. a classic muffler shop!

http://i279.photobucket.com/albums/k...psgcku5v2s.jpg

Palf70Step 05-25-2016 07:27 PM

Re: My 63 SWB BBW Build Frank
 
Nice! :metal:

NevEno 05-25-2016 07:35 PM

Re: My 63 SWB BBW Build Frank
 
Looking good as always! I like the picture

NVS-C10 05-25-2016 07:53 PM

Re: My 63 SWB BBW Build Frank
 
Quote:

Originally Posted by Palf70Step (Post 7605152)
Nice! :metal:

Quote:

Originally Posted by NevEno (Post 7605156)
Looking good as always! I like the picture

Thanks guys!!

Yesterday was the first time I took Frank out into the public since I started the project.. it was nice bringing Frank out even if it was only a trailer ride to the exhaust shop lmao :lol:

I should be finishing Frank up over the next two or three weeks and hoping to take him to some local shows.

SKT 05-30-2016 10:44 AM

Re: My 63 SWB BBW Build Frank
 
.
.

Looking good - what are the future plans w/ it?

.
.

C1ph3r 05-30-2016 11:22 AM

Re: My 63 SWB BBW Build Frank
 
Quote:

Originally Posted by NVS-C10 (Post 7605166)
Thanks guys!!

Yesterday was the first time I took Frank out into the public since I started the project.. it was nice bringing Frank out even if it was only a trailer ride to the exhaust shop lmao :lol:

I should be finishing Frank up over the next two or three weeks and hoping to take him to some local shows.

could you post up some pics of the exhaust work? I am trying to get some ideas on how I want to route mine when I lower it.

Thanks

NVS-C10 05-31-2016 02:05 PM

Re: My 63 SWB BBW Build Frank
 
Quote:

Originally Posted by SKT (Post 7609565)
.
.

Looking good - what are the future plans w/ it?

.
.

Plan number one.. get Frank out on the road!!! lol

NVS-C10 05-31-2016 02:09 PM

Re: My 63 SWB BBW Build Frank
 
Quote:

Originally Posted by C1ph3r (Post 7609608)
could you post up some pics of the exhaust work? I am trying to get some ideas on how I want to route mine when I lower it.

Thanks

I'll try and get up under Frank this weekend but I ran dual 2" exhaust with turbo mufflers outside the frame rails and exit to the front of the rear wheel wells. All tubing and mufflers do not hang below frame rails.

Here's a pic of the rear wheel well where the passenger side exits.

http://i279.photobucket.com/albums/k...ps1kgiinka.jpg

NVS-C10 05-31-2016 02:12 PM

Re: My 63 SWB BBW Build Frank
 
Did some sound deadening this weekend... only covered area under factory rubber mat.

http://i279.photobucket.com/albums/k...pscuuiyzpa.jpg

C1ph3r 05-31-2016 02:21 PM

Re: My 63 SWB BBW Build Frank
 
Quote:

Originally Posted by NVS-C10 (Post 7610818)
I'll try and get up under Frank this weekend but I ran dual 2" exhaust with turbo mufflers outside the frame rails and exit to the front of the rear wheel wells. All tubing and mufflers do not hang below frame rails.

Here's a pic of the rear wheel well where the passenger side exits.

Thanks man.

NVS-C10 05-31-2016 02:47 PM

Re: My 63 SWB BBW Build Frank
 
Gonna be buttoning up things under the hood this week!

http://i279.photobucket.com/albums/k...psjpaft5py.jpg

http://i279.photobucket.com/albums/k...ps1uob0dhh.jpg

NVS-C10 07-11-2016 05:31 PM

Re: My 63 SWB BBW Build Frank
 
Well Frank is pretty much completed.. for now, but I still have a few small things to finish up.

Got all under-hood mechanical buttoned up..
http://i279.photobucket.com/albums/k...ps2dmxpfmt.jpg

http://i279.photobucket.com/albums/k...psrafbq0oz.jpg


and finished my airbags, but still need to add a door to cover setup that matches the rest of the bed.
http://i279.photobucket.com/albums/k...psymvrzkfj.jpg

http://i279.photobucket.com/albums/k...psqyvoqjam.jpg

NVS-C10 07-11-2016 05:47 PM

Re: My 63 SWB BBW Build Frank
 
Yesterday I got to take Frank to the 2016 Brothers Truck Show in Anaheim, Ca

http://i279.photobucket.com/albums/k...psaijxyhbs.jpg

http://i279.photobucket.com/albums/k...pspmkcog5n.jpg

http://i279.photobucket.com/albums/k...psdqvorzfe.jpg

http://i279.photobucket.com/albums/k...psncq2nqz4.jpg

SKT 07-11-2016 06:37 PM

Re: My 63 SWB BBW Build Frank
 
.
.

Wow, looks great!

A lot of attention to detail in the engine bay and air set-up!

What's your plans for paint?

.
.

NVS-C10 07-11-2016 06:49 PM

Re: My 63 SWB BBW Build Frank
 
Quote:

Originally Posted by SKT (Post 7650052)
.
.

Wow, looks great!

A lot of attention to detail in the engine bay and air set-up!

What's your plans for paint?

.
.

Thanks.. other than a little more body panel detailing (color sanding/buffing/waxing/sealing), the paint and body are done.. I built this truck as a patina build.

62stepside longbox 07-11-2016 07:03 PM

Re: My 63 SWB BBW Build Frank
 
This truck just has so much attitude :metal:, I love it!


All times are GMT -4. The time now is 09:26 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com