LS various parts, garage sale
 

various LS parts here for sale. Garage sale of sorts for stuff I no longer need.
I take paypal
will also be at the spring Carlisle show so meetup to avoid shipping is available.
pictures are out of order, sorry.


1. Fbody 1 3/4 headers, Pacesetter ceramic coated. These fit 67-72 trucks fairly well, passenger side fits w/ no mods. Driver side may need small notch depending on how you mount the engine. The collector angle is off a bit, my plan if using these was to weld a bubble type flange on and connect up the exhaust.
$220 shipped make offers. not wild about shipping these so for a local deal I can do much better

2. DBW truck throttle body
little dinged up front lip. believe this was off a gen IV 5.3
$50 shipped

3. gen III front cover. black painted...new seal installed. installed but never run
$50 shipped

4. water pump, believe this was gen IV 5.3 - no idea on the # of miles but looks low
$50 shipped

5. starter, labeled 2000 gmc 5.3L . This was purchased from a junkyard...I never used it. looks in good shape
$60 shipped

6. windage tray and oil pickup for truck pan. from 5.3 engine.
$40 shipped

http://67-72chevytrucks.com/vboard/p...ictureid=24494
http://67-72chevytrucks.com/vboard/p...ictureid=24495

http://67-72chevytrucks.com/vboard/p...ictureid=24480

http://67-72chevytrucks.com/vboard/p...ictureid=24484

http://67-72chevytrucks.com/vboard/p...ictureid=24482

http://67-72chevytrucks.com/vboard/p...ictureid=24483

http://67-72chevytrucks.com/vboard/p...ictureid=24489

http://67-72chevytrucks.com/vboard/p...ictureid=24488

Re: LS various parts, garage sale
 

MSD 6010 kit, with Edelbrock Performer RPM dual plane intake (cathedral port)
(for 24x crank)

this stuff was purchased new quite a few years ago...never installed.

This is similar to the Edelbrock complete kit that lists for $1000+.
The MSD at at the time I purchased over the Edelbrock ignition module, because it had programmable timing curves. I'm sure things have changed since I purchased it...so I don't really know what this is worth.

I'll throw out $650 shipped for all
will separate if not interested in intake/ign together

http://67-72chevytrucks.com/vboard/p...ictureid=24486
http://67-72chevytrucks.com/vboard/p...ictureid=24485
http://67-72chevytrucks.com/vboard/p...ictureid=24487

Re: LS various parts, garage sale
 

TH400 convertor, meant to bolt to LS engines
it has an extended snout that fits the LS crank
3500 stall, mfg is Midwest Convertor
$225 shipped

flexplate and spacer, with bolts
$100 shipped

http://67-72chevytrucks.com/vboard/p...ictureid=24479

http://67-72chevytrucks.com/vboard/p...ictureid=24490