70-72 K10 body parts
 

1. Front clip - pretty good shape. Very little rust. Also have matching hood.
http://home.comcast.net/~drahe/part4.jpg
http://home.comcast.net/~drahe/part5.jpg
http://home.comcast.net/~drahe/part6.jpg

2. Cab with doors - has normal rust spots. Rockers, cab corners, cab mounts. Other then that, pretty decent. Glass is all good. Dash is good. Doors have rust on bottom.
http://home.comcast.net/~drahe/part1.jpg
http://home.comcast.net/~drahe/part2.jpg
http://home.comcast.net/~drahe/part3.jpg
http://home.comcast.net/~drahe/part7.jpg
http://home.comcast.net/~drahe/part8.jpg

3. Short Bed Fleet Side - pretty good shape. Very little rust. Some rust on support beam running under floor. Floor is not perfectly flat but is solid.
http://home.comcast.net/~drahe/part9.jpg
http://home.comcast.net/~drahe/part10.jpg

Parts are located in Central PA if that matters. Attached pictures don't show all the bad spots but hopefully they help. Ranges would be great.

Thanks!

Re: 70-72 K10 body parts
 

You should rent two spots at Spring Carlisle and haul them up.... Might be able to get $400 for clip, $700 for bed and $500 for the cab with doors? Really need to see them up close though.... I live south of Lebanon

welcome

Re: 70-72 K10 body parts
 

Thanks for the info Mike. Very helpful. Carlisle sounds like a good idea but unfortunately I don't think I can make it.

I also forgot to list that I have a short bed 4wd frame. From what I can tell it looks like it was a long bed that was cut down to make a short bed. Has some surface rust but is solid. Any idea's on what that's worth?

http://home.comcast.net/~drahe/part11.jpg

Thanks again.

Re: 70-72 K10 body parts
 

Maybe $200-300ish depending on the weld quality.... You should just put it together and have a truck!

What's funny is that it's worth more in pieces than together...

I'd be interested in a good drivers door...

Re: 70-72 K10 body parts
 

Hey there!

Nice Pics! just wondering if you are still selling those pieces or you got other plans for them? If so are willing to sell them, r u willing to sell them in pieces such as the 4x4 chassis or the cab?

thanks