|
85 C10 4 Link 9inch Z Frame Air T56 Build
Figured was about time I started a build thread before i'm finished. It's an 85 C10 I have had for a while. Was a long bed I shortened about 6 months ago. Been collecting parts for a couple years.
I will bring this up to current state quickly with alot of pictures. I work on it every day so progress has been very fast. Been 3 weeks since tear down and work started. Heree we go... http://i1269.photobucket.com/albums/...6482B420C5.jpg |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
|
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
http://i1269.photobucket.com/albums/...psb1b487a4.jpg
Fast forward to teardown complete. I don't have a frame table or jig so my garage floor will have to do. I welded stands onto my frame (at my projected ride hight) in 8 places, made the four front stands adjustable and painted around each one a mark on my garage floor so future measurments will be from same place.http://i1269.photobucket.com/albums/...psef324c65.jpg http://i1269.photobucket.com/albums/...psafd57f01.jpg http://i1269.photobucket.com/albums/...psbaabb6ce.jpg http://i1269.photobucket.com/albums/...ps30428811.jpg |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
I made my frame cuts for my Z at a 20 degree angle. I figured that a 2 1/2 inch Z at 20 degrees will move the front wheels (and everything else) forward just a hair less than an inch. Also I figured it would be a stronger connection. I laid out my cuts and tacked a fence for my saw so I would have a perfectly straight cut that would need no grinding. My thinking was it would be alot easier to line up the two pieces and I was right. Piece of cake.
http://i1269.photobucket.com/albums/...ps9e323808.jpg http://i1269.photobucket.com/albums/...ps82e966f0.jpg http://i1269.photobucket.com/albums/...ps17dbd38b.jpg http://i1269.photobucket.com/albums/...ps7cdbf35f.jpg http://i1269.photobucket.com/albums/...psb819dcbd.jpg |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
OK here you can see why I made the front frame "legs" or stands adjustable. They are 1 1/2 tubing with 1" pipe inside. The pipe is a very tight fit but will slide. There is a set scr
ew with 2 holes. One at ride hight and one 2 1/2 inches higher.. After cutting the frame I just removed the screw, lowered the legs and reinstalled the set screw. Now the front half is right where I needed it to weld. Wprked perfectly. http://i1269.photobucket.com/albums/...psecdc6fac.jpg |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
|
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
|
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
I plated the inside of the frame on both sides then half ground my ugly ass welds on the outside.
http://i1269.photobucket.com/albums/...pscf644ba5.jpg http://i1269.photobucket.com/albums/...psc47d5127.jpg |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
On the front I did the same 20 degree angle cut only backwards this time. I could have just made a straight cut and removed the inch (or whatever I gained on the first cut) but I thought doing the same angle was best.. First reason was that I am not sure exactly how much wheelbase I added. I know it's less than an inch (I hope) but do not know exactly. Second reason I did not make a straight cut here was I wanted to keep the 2 bumper bolt holes intact. That way everything would line up and bolt back on. If I cut straaight and removed an inch the bumper bolt holes would go away. I cut just past the steering box mounting holes and the same place on other side.
http://i1269.photobucket.com/albums/...psd53b6489.jpg http://i1269.photobucket.com/albums/...ps2cbd9538.jpg http://i1269.photobucket.com/albums/...ps4048a62f.jpg http://i1269.photobucket.com/albums/...ps9d319522.jpg http://i1269.photobucket.com/albums/...psd7372cee.jpg http://i1269.photobucket.com/albums/...ps7fdeb7c7.jpg http://i1269.photobucket.com/albums/...psec9e74d1.jpg |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
Looks awsome. I'm tuning in for the rest!
|
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
nice work bro Z looks good.....
|
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
Thanks...
So as you can see I used 2 inch X 1/4 flat bar to tie the frontr frame horns together and tied that into the factory front crossmember. |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
So I already had the step notch in back. Started the 4 link.
http://i1269.photobucket.com/albums/...ps8bd55176.jpg http://i1269.photobucket.com/albums/...psc6de82a4.jpg http://i1269.photobucket.com/albums/...psfec89a8c.jpg http://i1269.photobucket.com/albums/...psa093f36c.jpg http://i1269.photobucket.com/albums/...ps63aaacf1.jpg Posted via Mobile Device |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
im not much into lowered stuff, but i really like the creativity of that frame fabrication/modification! very nice job!
|
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
Bag mounts, shock mounts
http://i1269.photobucket.com/albums/...ps63aaacf1.jpg http://i1269.photobucket.com/albums/...ps44dffea2.jpg http://i1269.photobucket.com/albums/...ps1b661c15.jpg http://i1269.photobucket.com/albums/...ps5b737ae8.jpg http://i1269.photobucket.com/albums/...ps19988b24.jpg Posted via Mobile Device |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
Add a little paint.
http://i1269.photobucket.com/albums/...psf6e935f0.jpg http://i1269.photobucket.com/albums/...ps291c178b.jpg http://i1269.photobucket.com/albums/...pse1e3689c.jpg http://i1269.photobucket.com/albums/...psd90df842.jpg http://i1269.photobucket.com/albums/...psfcc8abfe.jpg Posted via Mobile Device |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
Dakota Digital SEN-201 height sensors for DHC-2000
http://i1269.photobucket.com/albums/...ps9fab194a.jpg http://i1269.photobucket.com/albums/...psc9eb6c89.jpg http://i1269.photobucket.com/albums/...ps159a23af.jpg http://i1269.photobucket.com/albums/...ps9b611f5e.jpg http://i1269.photobucket.com/albums/...ps8db9196e.jpg http://i1269.photobucket.com/albums/...psaf1b31ba.jpg Posted via Mobile Device |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
9 inch is from a 79 Lincoln mark 5, has single piston floating brake calipers and 3.70 r&p
Moved the battery and air tank behind the axle. http://i1269.photobucket.com/albums/...pse0cd3566.jpg http://i1269.photobucket.com/albums/...ps2ae6eb6e.jpg http://i1269.photobucket.com/albums/...ps65038a79.jpg http://i1269.photobucket.com/albums/...psf109683a.jpg http://i1269.photobucket.com/albums/...ps2d4a99dd.jpg Heres my water trap ....... http://i1269.photobucket.com/albums/...psf38791dd.jpg Posted via Mobile Device |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
And my Acuair valves with Dakota Digital pressure senders.
http://i1269.photobucket.com/albums/...ps2e9620d9.jpg http://i1269.photobucket.com/albums/...ps0057d5b0.jpg http://i1269.photobucket.com/albums/...psc2cde0d3.jpg Posted via Mobile Device |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
Had to cut the crossmember so I figured it was a good place for a driveshaft loop.
http://i1269.photobucket.com/albums/...ps23a8ce48.jpg http://i1269.photobucket.com/albums/...ps50118554.jpg http://i1269.photobucket.com/albums/...ps587af412.jpg http://i1269.photobucket.com/albums/...ps6cd73247.jpg http://i1269.photobucket.com/albums/...psd1c7cc30.jpg http://i1269.photobucket.com/albums/...psd699d6b3.jpg http://i1269.photobucket.com/albums/...psee0fab17.jpg http://i1269.photobucket.com/albums/...psa0f98662.jpg Posted via Mobile Device |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
lots of progress man.... keep up the good work...
|
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
Looks great & very well documented for the rest of us to learn from!!
I'm guessing you might have done this before....;) |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
Thanks. Never done this before but been thinking about it for a long time.
Posted via Mobile Device |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
Tank drain and blow off valve
Combo http://i1269.photobucket.com/albums/...ps10b34d8a.jpg Posted via Mobile Device |
Re: 85 C10 4 Link 9inch Z Frame Air T56 Build
looks sick dude
|
| All times are GMT -4. The time now is 02:34 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com