67-72 Bench seat lowering brackets ??
Hello. Before I chop and fab my original bench seat brackets does anyone make lowering brackets for a 67-72 factory bench. I need more head-room.
Thx Steve |
Re: 67-72 Bench seat lowering brackets ??
1 Attachment(s)
Yes they do. Full Custom Fabrication makes them. I know a few guys on the forum have used these already. The ones shown in the link are their original design. The new brackets are solid and have FCF laser cut into them.
|
Re: 67-72 Bench seat lowering brackets ??
Do you gain more room between the steering wheel and the driver when you lower the seat?
|
Re: 67-72 Bench seat lowering brackets ??
Yes it does. I am 6’3” and definitely worth the money.
|
Re: 67-72 Bench seat lowering brackets ??
I got them installed yesterday. Makes a huge difference.
|
Re: 67-72 Bench seat lowering brackets ??
I have the FCF brackets. I love the way it sits, now! I'm 6'4", and the driving position is so much better!!
https://i.hmjimg.com/images/2018/05/..._150152.md.jpg https://i.hmjimg.com/images/2018/05/..._122201.md.jpg https://i.hmjimg.com/images/2018/05/..._122215.md.jpg |
Re: 67-72 Bench seat lowering brackets ??
A good piece of advice, install the bolts from underneath to create a "stud" so the brackets just slips over it, then install a washer and nut. Much easier than trying to wiggle a bolt in place through the floor.
|
Re: 67-72 Bench seat lowering brackets ??
Those that have installed these... my issue is legroom... do you gain or lose any? I have almost no headroom after installing new seat foam. I really like how comfy the seat is now, but on a good enough bump, I've bumped my head on the cab roof. If I can lower the seat and not loose leg room that sounds like a fantastic plan to me.
|
Re: 67-72 Bench seat lowering brackets ??
Awesome, now I can install my headliner without my head being in the way.
|
Re: 67-72 Bench seat lowering brackets ??
Quote:
Steve |
Re: 67-72 Bench seat lowering brackets ??
Does anyone know if these brackets will work on the popular 88-90 seats??
|
Re: 67-72 Bench seat lowering brackets ??
Quote:
|
Re: 67-72 Bench seat lowering brackets ??
Quote:
Are you doing any of the Power Tour next month? It's in our neck of the woods almost the whole drive. |
Re: 67-72 Bench seat lowering brackets ??
Quote:
No plans for Power Tour. It conflicts with my wife's vacation time. |
Re: 67-72 Bench seat lowering brackets ??
3 Attachment(s)
Received my new brackets and getting ready to reinstall my seat one evening.
|
Re: 67-72 Bench seat lowering brackets ??
So just how much lower are these brackets vers stock? approx?
|
Re: 67-72 Bench seat lowering brackets ??
2 inches
|
Re: 67-72 Bench seat lowering brackets ??
Quote:
|
Re: 67-72 Bench seat lowering brackets ??
Very much so. I will post pics tonight of the difference
|
Re: 67-72 Bench seat lowering brackets ??
Quote:
|
Re: 67-72 Bench seat lowering brackets ??
I bought a set as well. Not installed yet, but they appear to be very nicely made with a good quality finish on them.
Almost a shame you won't be able to see them. |
Re: 67-72 Bench seat lowering brackets ??
2 Attachment(s)
I will post these pics on both threads to hopefully help. In one pic, (the best I have) you can see the top of my seat right to the real window rubber - and with brackets installed, the amount the seat has dropped overall. I'm afraid I forgot this morning to measure clearance under the seat for sub-woofer installation, but still can.
|
Re: 67-72 Bench seat lowering brackets ??
1 Attachment(s)
Thanks for showing that photo. That looks like a big difference! I am guessing I may still need to cut my foams. If you notice in my picture, the back foam curve does not meet the seam on the seat cover. I noticed this when I was assembling the seat but must have been in denial figuring it would be OK. But when I sit in the seat I feel like I am being pushed forward as well as pushed up.
BTW nice truck! |
Re: 67-72 Bench seat lowering brackets ??
Yes, I see. I want to look as well at the mounting. The bracket bases have a slotted hole, and I feel like the seat had to be in the forward end of the slot, pushing it just slightly more forward, but I will check.
|
Re: 67-72 Bench seat lowering brackets ??
I'm tempted to go buy some C-channel or square tubing and weld a cross piece as a trial to see the height as well as seeing if I feel like I'm sitting on the floor.
|
All times are GMT -4. The time now is 08:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com