The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Dash pad laying flat? (https://67-72chevytrucks.com/vboard/showthread.php?t=836120)

CK5	07-11-2022 03:53 PM

Dash pad laying flat?

Does anyone else's dash pad raise up on the left side? Is there a trick to getting it to lay flat? TIA

tutone

07-11-2022 04:00 PM

Re: Dash pad laying flat?

There are some pretty hard to get to nuts under the dash. Are they on all the way?

CK5	07-11-2022 04:07 PM

Re: Dash pad laying flat?

Not sure, haven't looked yet, just trying to figure out "where" to look.

tutone

07-11-2022 04:27 PM

Re: Dash pad laying flat?

There is one on each end and a few along the length of it. Then there are some phillips head screws on the outside bottom. You can access it all easier if you pull the instrument cluster. Its not a must do, if you have the right 1/4 ratchet attachments

CK5	07-11-2022 06:23 PM

Re: Dash pad laying flat?

Looking at it closer, it looks like the material has separated from the backing, might have to add a new dash pad to my list.

All times are GMT -4. The time now is 07:23 PM.