The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Engine & Drivetrain (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=24)
-   -   LT1 motor, where does the brake booster vacuum hose connect to on the intake side? (https://67-72chevytrucks.com/vboard/showthread.php?t=287203)

Michael Hill 04-11-2008 07:27 AM

LT1 motor, where does the brake booster vacuum hose connect to on the intake side?
 
Does anyone have an LT1 Corvette motor that can tell me where the brake booster vacuum line connects too on the intake side? I put an LT1 in my 86 GMC truck but cant figure out where the vacuum hose connects from the brake booster to the intake? Any help or pictures would be greatly appreicated, thanks Michael Hill.:sumo:

low'n slow 04-11-2008 07:33 AM

Re: LT1 motor, where does the brake booster vacuum hose connect to on the intake side
 
Pull off your Corvette cover and you will see a port right between where the V & E would be. Hose routes through the back and under the cover.

Michael Hill 04-11-2008 07:37 AM

Re: LT1 motor, where does the brake booster vacuum hose connect to on the intake side
 
Awesome, thanks, another question i have an 96 LTI and was wondering where the PCV valve connects. I have the PCV valve on the intake side but was wondering where does that connect? Any help would be greatly appreciated, thanks Michael.


All times are GMT -4. The time now is 06:44 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com