69 suburban parts
 

Very little left of this 2wd burb. I had to bring it in to get a few pcs for my panel truck so figured I would put the rest on here for sale. The lower outside body is ROTTEN. The inside floor for the 2nd row is almost perfect and I am cutting it out complete including the rear step up in one pc. I have not gotten to the frame and it will be a bit before I do. Let me know if you see any metal cuts you can use. They will start at $25 plus shipping. I will wait to price the floor section until I get it out which will hopefully be tomorrow.

Re: 69 suburban parts
 

6-10

Re: 69 suburban parts
 

11-15

Re: 69 suburban parts
 

16-20

Re: 69 suburban parts
 

21-25

Brake pedal assem. $45 plus shipping
Gas pedal rod Assembly $30 plus shipping
Have not tested horns yet
Auto Transmission brace $50 plus shipping
Washer jug & bracket $15 plus shippingSOLD
Inner & outer Heater will need to be removed to check for damage

.

Re: 69 suburban parts
 

Radio patch panel $40 plus shipping
Wiper motor untested but looks nice $20 plus shipping
Cigarette lighter harness $25 plus shipping
Ball bearing ashtray with mount and screws $30 plus shippingSOLD

.

Re: 69 suburban parts
 

Untested AM radio missing one cup and rear brackets. Chrome is good for DD but does have some minor pitting $75 plus shipping

.

Re: 69 suburban parts
 

Re: 69 suburban parts
 

How much for this about 6" toward the front top and bottom cut flush with door opening in back , both sides to Indiana 47265

Re: 69 suburban parts
 

This one has the same problem with cancer on all the mounting flanges. I am actually keeping both of these to widen the tubs on my panel truck. I have 2 more sitting outside and will take a look at them to see if they are any better. do you just need the left or both of them?

Richard

Re: 69 suburban parts
 

Is this how you are wanting it cut? The metal looks in good shape on both sides but the drip rail does have some pitting. I think you can see it in these pics. Let me know.

.

Re: 69 suburban parts
 

Yes but below the body line just a little and on the top come out few inches more, would like to have the radius in the window opening till it straightens out, if that doesn't make it to large to package. Drip rail pitting is fine, I'm going to fab a new on full length anyways . Thank you

Re: 69 suburban parts
 

I am interested in both the ashtray and bracket and the washer jug and bracket for $40 plus shipping to 95366

thx Steve

Re: 69 suburban parts
 

ok so more like this? You did want both sides as well correct? Also PM me you complete shipping address so I can get correct costs the online calculator has been way off here lately when using just zip code.

Richard

Re: 69 suburban parts
 

They would be $55 shipped
PP is in my signature if you want them.

Thanks
Richard

Re: 69 suburban parts
 

SOLD moneys being sent in 5 mins thank you will attach actual email with the PP

thx Steve

Re: 69 suburban parts
 

Got your payment and they will ship tomorrow

Thanks
Richard

Re: 69 suburban parts
 

413 8th st North Vernon Indiana 47265

Re: 69 suburban parts
 

Sent you a pm regarding costs

Re: 69 suburban parts
 

Richard, I’ll take the green & red lighter harness & I need a couple cuts from the barn door section so I can close the holes where the clam shell hinges mount up top.
-Zack

Re: 69 suburban parts
 

So you just need something about the size that will fit into a small flat rate along with the harness? what about the lower sill panel where the tailgate hinges were?

I put a red square up top and it looks lost lol
.

Re: 69 suburban parts
 

Exactly & yes, I’ll take pieces for the lower hinges as well.
Thanks

Re: 69 suburban parts
 

Richard
I am interested in the dual horns and wiring harness.
Attachment 1812413
When ever you have time to test them.

Re: 69 suburban parts
 

Re: 69 suburban parts
 

Here are pics of what I cut this morning. They will have to go medium flat rate. I cut the specific sections out for the bottom since they appear to need to be that exact spot. Since it has to go medium box I cut enough of the top hinge section so that you can delete the bolt holes as well if you wanted to. I will pm you in a few minutes

Richard