Static dropped 64 - Alignment Specs
Hello,
I’m almost finished the build on my ‘64 and it’s time to get the alignment done. It’s dropped 4” at the front (-2” spindles and -2” spring) and 5” at the rear ( 4” spring and 1” lowering block). Could anyone help me out with the camber, castor and toe-in specs. I’m in England so it’s unlikely my alignment shop will have them :lol: Thanks |
Re: Static dropped 64 - Alignment Specs
A timely post Ian as I am approaching that stage.
Do we have another series of pictures incoming? P. :D |
Re: Static dropped 64 - Alignment Specs
|
Re: Static dropped 64 - Alignment Specs
If it's just a street vehicle, I'd do as much positive caster as you can adjust into it, about -1/2° to -1° camber (more negative if you want to drive hard), and about 1/16" toe in.
Your shop will likely want degrees for toe. Maths. |
All times are GMT -4. The time now is 05:39 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com