Re: What did you do to your truck today? Chapter II
 

Got the intake bolted on, carb bolted on, cable bracket on, throttle and kickdown hooked up, and dizzy stabbed and set at TDC. Just need to change the oil, install the cap and wires, and toss some fuel in it so I can time it.

Also found the casting numbers on my heads.

They are 14014416.

Re: What did you do to your truck today? Chapter II
 

Took my instrument cluster apart, cleaned thoroughly, painted the needles, cleaned the lens with Mequiar's headlight kit, and painted the silver on the bezel. Not a perfect job as I'll more than likely get new gauges when the 6.0 goes in, but looks much better IMHO.

http://farm3.staticflickr.com/2812/1...1bee5a88_z.jpg

Re: What did you do to your truck today? Chapter II
 

Thanks BruthaMan! I took a look at your's and it's looking good.

Re: What did you do to your truck today? Chapter II
 

Started with this at 10:00 this morning.

It's a 3970010 block that was handed off to me by a great friend and Forum Member.

On my first unpracticed eye inspection, the block looks great. I'll get it hot tanked, measured
up, and m-fluxed as the first steps. Thanks again, Tom.

She's down to a bare block now. Yup, 4.0 bore.

The crank rod journals are almost funny. About four of the bearings looked like they have been
spun like race horses.

But, what the heck? The crank was probably going bye-bye, anyway. NBow, it's surely, "383 here I come".
It's just all so damned much money.....

I'll post the cleaned up pics and maybe a couple of rod journal pics as
soon as I can get *myself* cleaned up.

;););)

Re: What did you do to your truck today? Chapter II
 

Here's where it ended up today. Calling it a day.

No pics of the crank....Too sad....:lol::lol::lol::lol:

Re: What did you do to your truck today? Chapter II
 

Finally mounted some new tires on the rally wheels I refurbished. I like the new look.
Before:
http://i212.photobucket.com/albums/c...ps25622f8d.jpg
After:
http://i212.photobucket.com/albums/c...ps70aaaaab.jpg
http://i212.photobucket.com/albums/c...ps8ade821f.jpg
http://i212.photobucket.com/albums/c...psfed8e670.jpg

Re: What did you do to your truck today? Chapter II
 

They look alot better tucked under the truck, nice!

Re: What did you do to your truck today? Chapter II
 

Checked on the cutout fender....it should be on its way this week to a garage in town. I called the garage too to give them a heads up.

Re: What did you do to your truck today? Chapter II
 

I finished my interior upgrade this last weekend.. all new interior hardware, seat belts, door panels re-done, bench seat redone (bought a donor seat), new carpet, dash pad, etc. It was gratifying doing all the work myself.

Here it is finished:

http://i1320.photobucket.com/albums/...s6a7f44cd.jpeg

And before I started:

http://i1320.photobucket.com/albums/...ps47171fe1.jpg

Re: What did you do to your truck today? Chapter II
 

Here's a pic of the rod journals on the crank AFTER the rod big-end bearings were removed.

I think I need to do something to the crank. Like take it to the junk man.
The block looks really good, though. We'll see after a mag-flux.

:metal:

This is the kind of stuff you can buy on E-Slay ...Usually says something like, "...10,000 miles since it was machined".

In this case, it was a wonderful gift. Looks like I have a nice block to work with.

Re: What did you do to your truck today? Chapter II
 

Dude... that is smooth... Build it with that crank... LOL

Re: What did you do to your truck today? Chapter II
 

I worked on a right chevy fender for one of my 70's on putting a lower cup portion on[in]. Also did some checking on the core support that I had cut for a patch, making plans to get it on the table after the cup is welded in. I don't get to work on that stuff much the body shop is normally busy with other stuff. Jim

Re: What did you do to your truck today? Chapter II
 

Got some pics from the Body Shop today... the Floor is in... One Rocker and 1 cab corner... working on the other cab corner and rocker along with the left kick panel... Starting to come together... I am so Stoked!!!...

http://images9.fotki.com/v749/photos.../21814A-vi.jpg


http://images16.fotki.com/v387/photo.../21814B-vi.jpg


http://images16.fotki.com/v387/photo.../21814C-vi.jpg


http://images60.fotki.com/v367/photo.../21814D-vi.jpg

Re: What did you do to your truck today? Chapter II
 

Finished my glovebox door today. Back on the truck tomorrow.

Re: What did you do to your truck today? Chapter II
 

C-Notched the rear, cut out 3" holes in the center cross-member for future dual exhaust and installed cupped LCA's...

She is laying as low as possible, without doing drop spindles and disc conversion :)

She goes in this week for body work and paint...

Re : I See Good Things !
 

THANK YOU for the engine and crankshaft photos ! .

Engine works are my favorite because it's always so easy .

You might want to show better pix of the ' wiped ' bearing shells clearly showing the bare copper underlay ~ .

I see this all the time and occasionally the crankshaft is O.K. and can be carefully polished with crocus cloth and re used , not this one I don't think :waah: .

Never forget that ALL self service Junkyards are chock full of standard 350 cranks , cheaply .

I may soon have an extra good used 292 crankshaft , I now have two 292's and will cherry pick parts to build up one nice one for my '69 C/10 , then I'll be clearing out lots of spare 292 stuff, a bare block that needs sleeves , a spare cylinder head , connecting rods and so on .

I'm GREEN with envy looking at the cab repairs here ! I went and visited my truck again , still no work done .

I know , I know , patience is a virtue but dammit , I DRIVE my truck daily so three weeks + is too long for no worky ;) .

:chevy: .

Re: Re : I See Good Things !
 

Here you go Nate. I shot another close up of one of the crank's rod journals, and the bearings all lined up with nowhere to go. That one bearing is my favorite.

I'm gonna clean 'em up and run 'em. :exit:

Re: What did you do to your truck today? Chapter II
 

[QUOTE=BugzC10;6530713]Finally mounted some new tires on the rally wheels I refurbished. I like the new look.

Those wheels and tires look perfect!

Re: What did you do to your truck today? Chapter II
 

[quote=OregonNed;6533911]Thank You....I paused for a long time before pulling the trigger. Wheel tire decision was driving :uhmk:

Re: What did you do to your truck today? Chapter II
 

Still messing around in the garage today.

Got the new (working) fuel pressure gauge in, finished up the fuel pressure regulator.

And made a sticker for the fire wall cover using a pic from the web along with a pic of
my wife in 1947. Figured she should have her pic on RAT somewhere.

I See DEAD Things !
 

WOW :jdp: those are awful .

Maybe you can post some close ups of the cam lobes and followers so the others will know what's good Vs. bad ? .

Re: What did you do to your truck today? Chapter II
 

Man that looks great!What kind of oven do you use?

Re: What did you do to your truck today? Chapter II
 

Got the new rotor's installed this past weekend. Zinc coated slotted dimpled drilled.;):chevy:


http://i1233.photobucket.com/albums/...ps08363967.jpg


http://i1233.photobucket.com/albums/...ps90fd239f.jpg

Re: What did you do to your truck today? Chapter II
 

Cleaned up the sound deadener under the hood.

Re: What did you do to your truck today? Chapter II
 

Installed new "true-double roller" timing set. Had pix of old set but got a new phone and haven't downloaded them yet. It was bad...almost full inch of chain travel between sprockets! Removed intake because i had the gaskets, and it needed a thorough cleaning.removed thermostat to check condition.Add thermostat and housing to the list of "things that cost money and need to be replaced."water pump is also on that list... Everything is prepped for paint,I.e.:block,oil pan, timing chain cover,balancer,intake. paint tomorrow. Also, new H.E.i. dizzy,Taylor wires, plugs, and one wire alternator came in today! Far more work (money) than I had planned.but glad I did it.