The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Racing and high performance (trucks haulin more than hay) (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=60)
-   -   Vintage Pass 67 Dragtruck 2003 (https://67-72chevytrucks.com/vboard/showthread.php?t=302156)

67dragtruck 08-07-2008 06:36 AM

Vintage Pass 67 Dragtruck 2003
 
You guys like videos and pics so here's one for you. This is my best pass ever 1/8 mile in the 67 Dragtruck. We were there to match race so were not posting times, but it was a 5.32 @131.6. Nowhere near what Chris Shortridge is running in that other video posted recently, but bear in mind that this is 5 years ago in 2003 and was done on factory trailing arms. My truck was all steel except for the hood. It still had all factory glass except for the back window where the roll cage went through, and even had power windows and door locks.

Hope you enjoy.

Tom


FRENCHBLUE72 08-07-2008 11:27 AM

Re: Vintage Pass 67 Dragtruck 2003
 
it says video is no longer available

Jtrux 08-07-2008 11:51 AM

Re: Vintage Pass 67 Dragtruck 2003
 
Holy cow, that's nucking futs!!

Rodms 08-07-2008 12:03 PM

Re: Vintage Pass 67 Dragtruck 2003
 
That was a good pass 67,I wish I had the old rearend in mine like that instead of leaf springs

68ChevyGuy 08-07-2008 06:35 PM

Re: Vintage Pass 67 Dragtruck 2003
 
Very wicked, your sig says no more drag truck.. Why did you get rid of it ?

Marv D 08-07-2008 07:08 PM

Re: Vintage Pass 67 Dragtruck 2003
 
Wow, that's flat MOVING!!!

67dragtruck 08-07-2008 07:08 PM

Re: Vintage Pass 67 Dragtruck 2003
 
Quote:

Originally Posted by 68ChevyGuy (Post 2840011)
Very wicked, your sig says no more drag truck.. Why did you get rid of it ?


Racing at that level is very expensive. I put a smaller motor in it, the sbc in my sig, but it was not the same and still a bit much for a street truck. Now I'd just prefer a cool street truck. I raced plenty to get it out of my system. I did it non stop for about 6-7 years.


Tom

djracer 08-07-2008 08:47 PM

Re: Vintage Pass 67 Dragtruck 2003
 
I talked him out of the truck without the motor!













We might get that fast one day!

Jerry Jones 08-07-2008 08:54 PM

Re: Vintage Pass 67 Dragtruck 2003
 
That is friggin awsome!

blkboot 08-07-2008 11:17 PM

Re: Vintage Pass 67 Dragtruck 2003
 
So What Happen To The Motor

67dragtruck 08-08-2008 06:17 AM

Re: Vintage Pass 67 Dragtruck 2003
 
Quote:

Originally Posted by blkboot (Post 2840476)
So What Happen To The Motor

I sold it in pieces. For the technology of the time and the size it was an awesome motor. I just didn't have the money to build one of the big motors and just as I was getting out of it the turbo's were starting to show up and all I can say about the turbo motors is wow.

djracer 08-08-2008 07:02 AM

Re: Vintage Pass 67 Dragtruck 2003
 
If I wasn't so ignorant to the turbo stuff I would put a couple under the hood of the old truck But I do like the way the nitrous cars leave allot better than the turbo stuff!

67dragtruck 08-08-2008 10:25 AM

Re: Vintage Pass 67 Dragtruck 2003
 
If I had a sponsor to pay for everything, I'd build one with trailing arms still that had a twin turbo big block. A pair of 88's would do the trick nicely.

Tom


All times are GMT -4. The time now is 12:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com