1970 C10 restoration completed
 

This is a re-post of my '70 build since photobucket no longer supporting pics for free.

I finally got my restoration complete and I'm on the road. 4 months of a lot of work but well worth it! The truck was in pretty good shape. some rust not much and very solid for the most part.
I wanted to thank all here for the great advise, tips, and guidance I received. What a great resource this is.

First up was a freshing up of the top end of the engine.
HEI dist, intake, 600 edelbrock carb, valve seals, covers, etc.
https://s19.postimg.cc/xfv0lo6n7/IMG_4166.jpg

60 degrees in Cleveland in February!!?? shut off the shop furnace and cut that sucker in half outside. Used the brothers kit which is pricey but made the process very simple. although FYI their cab mount measurement for the template is off by 1/2"
https://s19.postimg.cc/5va6di0jn/IMG_1614_-_Copy.jpg

https://s19.postimg.cc/poma67dxf/IMG_1613_-_Copy.jpg

stripped off the anodizing coating from the grille with hair/grease drain cleaner and a scotch bright pad. then sanded all the way up to 2000 grit wet and buff. Lastly coated the bare aluminum with protectaclear (great stuff btw).
https://s19.postimg.cc/pgu1vydkz/201..._OS_-_Copy.jpg

next turned my attention the interior paiting
https://s19.postimg.cc/dhn52dxdv/201..._OS_-_Copy.jpg

https://s19.postimg.cc/v6aag9jr7/201..._OS_-_Copy.jpg

https://s19.postimg.cc/6go4j6cqr/dash.jpg

re dyed all the interior panels, dash pad, steering wheel, etc. originally was a dark green, laid new carpet and installed houndstooth cover.
https://s19.postimg.cc/ofisgedqb/interior.jpg

interior spray with Dupont single stage.


stripped off all the body panels, fenders doors, hood, etc. and sprayed them in base coat clear coat at my work booth, again DuPont products. Being a cabinet maker by trade I'm comfortable in a booth and just took my time. auto paint is quiet different than lacquer and poly wood clears.I've spray 2 other trucks in the past and each time got a little better with it. overall happy with the results
https://s19.postimg.cc/lklbdphz7/IMG_1965_-_Copy.jpg

https://s19.postimg.cc/tas3iukar/201..._OS_-_Copy.jpg

https://s19.postimg.cc/9b2an1xs3/201..._OS_-_Copy.jpg

https://s19.postimg.cc/5suw4em9v/201..._OS_-_Copy.jpg

wetsand, buff and install the trim
https://s19.postimg.cc/8vg03lszn/side1.jpg

shot the wheels in a single stage pewter color
https://s19.postimg.cc/qit7o2dj7/side.jpg

wood laminate over exterior ply, cost $0, see how it holds up.
https://s19.postimg.cc/ktcz3r7cz/bed.jpg


on the road on fathers day. each one of my kids got a ride in the old truck.
great day. got the truck for $2,200 and put $6,000 into it, ($2,000 of that was in shortening the bed and new bed sides/shipping, kit etc)
so total investment of $8,200 and I finally got my old C10 I've always wanted. I'm a happy guy!
Finished truck.
https://s19.postimg.cc/yyndjb5s3/C6_...F08_AC3721.jpg





__________________
My build page
http://67-72chevytrucks.com/vboard/s...93#post8040293
My cabinet building site
http://www.cbcabinets.com

Re: 1970 C10 restoration completed
 

Looks great man! Gives me motivation to get started on mine!

Re: 1970 C10 restoration completed
 

Awesome truck Mark...cost wise you did very well. I know the labor is 3x the parts and starter truck, You have a lot to be proud of !

Re: 1970 C10 restoration completed
 

Very nice- thanks for sharing! Good write up and pics

Re: 1970 C10 restoration completed
 

Thanks. It was a fun project and family and I are enjoy the truck.

Re: 1970 C10 restoration completed
 

Very nice!

Re: 1970 C10 restoration completed
 

What a beauty. Nice work!

Re: 1970 C10 restoration completed
 

Super nice...Great work on the conversion

Re: 1970 C10 restoration completed
 

You did all that in 4 months?! Holy crap thats nice! Great work.

Re: 1970 C10 restoration completed
 

Very nice!!!

Re: 1970 C10 restoration completed
 

$2200 and the corners weren't even rusted out???????? You got an incredible deal on that truck.