The 1947 - Present Chevrolet & GMC Truck Message Board Network - Lower control arm rubber seal, which way does it face?

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - Lower control arm rubber seal, which way does it face? (https://67-72chevytrucks.com/vboard/showthread.php?t=850365)

Railroadman

02-02-2024 09:32 PM

Lower control arm rubber seal, which way does it face?

1 Attachment(s)

Did a search of old threads but still not certain on this one. '66 C20, lower control arms. What is the proper orientation of the raised "lip" on the rubber seals - toward the shaft as I have it started below, or lip to the outside where it will contact the nut? Thanks!

SpudWrench

02-15-2024 02:44 PM

Re: Lower control arm rubber seal, which way does it face?

flip it

Railroadman

02-15-2024 03:01 PM

Re: Lower control arm rubber seal, which way does it face?

Quote:

Originally Posted by SpudWrench (Post 9287317)

flip it

Thanks Spud! I had looked it over and come to the same conclusion. That problem is solved, then I took a "stupid pill" and created a new one. Still evaluating that issue and will probably start a new thread soon.

I appreciate the help!

All times are GMT -4. The time now is 06:09 PM.