The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   1967 - 1972 Chevy/GMC Suburbans and PanelsProjects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=212)
-   -   New replacement 2 barrel carb feedback (https://67-72chevytrucks.com/vboard/showthread.php?t=764115)

1966 K10 05-19-2018 01:00 PM

New replacement 2 barrel carb feedback
 
This came through my Amazon feed and wondered if anyone has any feedback on quality/function.

It says 70-79 5.7, is there any difference in bolt pattern that would keep it from working on an earlier manifold? Im assuming its due to the electric choke that it shows the later applications.

Thanks for any info.

https://www.amazon.com/Carburetor-Ro...ype=automotive

geezer#99 05-19-2018 01:54 PM

Re: New replacement 2 barrel carb feedback
 
Depends how early.
There was a small base and a large base carb.
Small base was 3 1/4 inches from bolt hole to bolt hole.
Large base was 3 11/16.
That carb is likely a large base.

1966 K10 05-19-2018 02:48 PM

Re: New replacement 2 barrel carb feedback
 
Trying to make a 350 look like a stock 283 for my 66. Would the stock 66 manifold be early or late?

geezer#99 05-19-2018 03:50 PM

Re: New replacement 2 barrel carb feedback
 
You’d need to measure it.

How do you plan to use a pcv on your fake 283.

1966 K10 03-08-2019 10:10 PM

Re: New replacement 2 barrel carb feedback
 
1 Attachment(s)
Well, finally was able to get to the truck and pull the carb and you were right its the early 3 1/4 small bore manifold/carb.

As far as the PCV, its a factory closed system so will be leaving it intact.


All times are GMT -4. The time now is 08:21 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com