ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
After spenfing two years collecting parts and planning on building the ultimate Blazer, life has changed my plans. You guys have helped me in knowing what to do and what parts to be collecting so now I am turning to you guys to help me clear out my collection.
The list below is about as good as inventory as I can come up with. I am sure I am missing a few things so if you are needing something please let me know. I am guessing at a lot of these prices so if you see something that you think is too high or too low please let me know that as well!!!! I have many Truck Parts as well. Check out the thread in that forum with the EVERYTHING MUST GO title. Here we go 72 Suburban Rolling 2wd, Possible Rebuild but May Be Better For Parts $1000 No Title 72 Blazer 4wd, (the primered one in the pics) 350/350/205 Setup, Body and Chassis Only, Was Running before I pulled the Front Clip $1500 Have Title 72 Jimmy Rolling, (the orange one in the pics) Body & Chassis Only, Was Converted to 2wd but still have all of the 4wd Stuff, Have Title 6 Lug 12 Bolt Rear End for 1/2 Ton Truck $150 Suburban Third Door Strike Pillar and Hinge Pillar. This was cut from a salvaged Burban $75 Stainless Burban Interior Trim ?? Blazer Hard Top Glass ?? Blazer Double Wall Hard Top, Needs Edge Work but Really Nice Top $800 Blazer & Suburban Back Seat Frames w/ Arm Rest - qty 3 $100 Non Tilt Auto Columns - qty 3 $25 ea Bench Seat Frames - qty 3 $25ea Complete Non A/C Dashes, Not Cut Up - qty 2 $100ea Complete A/C Dash, Not Cut Up $150 Blazer/Suburban Gas Tank - $75ea 4X4 Transmission Tunnel Cover $75 Wide Bed Wheel Housings $25ea 69-72 Hoods - qty 3 $100 to $150 67-68 Grill Shell $300 69 Grill Assembly w/ CHEVROLET lettering $250 72 Grill Assembly 2/ Bow Tie $200 69-72 Driver Fender Rust Free - qty 2 $75ea Drivers Inner Fender $40 Radiator/Core Support Battery Tray Rusted but nothing else $75 67-72 Rear Chrome Bumper $50 Aftermarket but straight 67-70 Chrome Front Bumper $75 Original but needs some edge straightening 10 Bolt 1/2 Ton 4wd Front Axle w/ springs $100 Turbo 350 2wd Trans $75 700R4 2wd Trans $75 350 4 Bolt Main Block only with Caps $100 Complete 454 Big Block w/ accessories $650 I have many interior pieces, brackets and just other stuff that I havent even gone through yet. So please ask!! I would be happy to ship any items that are shippable as long as the frieght is paid for. I have a PayPal account for such transactions. For Pick Up, I am located just outside of Oklahoma City. Feel free to contact me with any questions or comments at redline5.0junkie@gmail.com I have posted a few photos of the items above on photobucket. Follow the link and enter the password ( allmustgo ) . http://s1057.photobucket.com/albums/...%2072%20TRUCK/ If you would like more detailed photos or information please let me know. Thanks for looking and I hope someone out there can put all of this stuff to good use. |
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Might be interested in a pair of 72 rust free doors with no speaker holes?
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Do you have the upper molding for the Suburban?
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Do you have a set of rear panel stand-off brackets? I'm looking for the six that mount to bedside and i think there are 8 small angle iron brackets that mount to floor and front and rear bed side. Do you have any front or rear carpet strips? thanks, Eli
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Quote:
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Quote:
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Do you have a set of blazer sun visors?
Posted via Mobile Device |
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Any pics of the wide bed wheel housings??
Thanx |
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Quote:
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Quote:
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
clicked on link for photos but cant find where to input passwrd
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Quote:
http://s1057.photobucket.com/albums/...%2072%20TRUCK/ Takes you right to it |
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Just so everyone knows if the Burban needs to be cut up I am willing to do so. I know a lot of guys are wanting to do crew cab set ups and hard top Blazers.
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
I am interested in the blazer body and chasis. i cant get your photo bucket to work. could you email pics to samberg91@yahoo.com. I am in nw arkansas and could come and pic it up.
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Quote:
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Are u willing to ship the gas tank And straps?
Posted via Mobile Device |
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
How much on the fuel tank straps and what condition are they in?
Thanks |
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Quote:
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
2 Attachment(s)
Quote:
Quote:
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
4 Attachment(s)
Quote:
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Quote:
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Quote:
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Quote:
|
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Yeah, can you get some pictures of both tanks?
Posted via Mobile Device |
Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More
Quote:
|
All times are GMT -4. The time now is 10:49 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com