69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

Like the title says, we now have the 69-71 Blazer / Jimmy Door Inner to Outer Door Skin Reinforcement Bezel kits in stock. $19.95 plus $3.50 first class mail shipping. If you want to order more than one kit, I can get probaly 4 or 5 in the same padded shipping envelope for no additional cost. WES

Payment by phone Monday thru Saturday 9:00AM to 6:00PM (360)570-1860
Payment by paypal: wehepp@comcast.net (please put what you are buying in the notes.
website link: http://classicheartbeat.com/69-72_blazer.htm

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

Mine arrived today, and look superb! Thank you Wes!
Randy

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

Hello Wes -- I have 71 panels in my 72 which I rather like. However I don't have the OEM fasteners. In these kits is it just the parts in the picture or is there more and can you send a photo of these in use on a door?

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

just the parts pictured. WES

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

Hey Randy, can you take a picture when installed please?

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

I certainly will this weekend!

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

71k5Randy when u do your pics could u put a tape on the wing window upright for a location reference

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

Yep, I’ll take lots of pictures

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

Here’s pics of mine going through removal and installation of new:
1) Original ferrule installed.
2) Ferrule removed.
3) 1/2” dia hole. Looks drilled by hand, not by a drill press.

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

More pics:
4) Clip inside door
5) template for drilling hole (note I later got a better measurement from the post of 2-13/16.
6) New ferrule installed. Nicest part of my doors now, lol!

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

Looks super Randy, thanks for sharing and now I understand what the kit is for.

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

Thank u Randy I can locate mine know and insatt

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

Randy can u please verify the measurement from the center of the hole down to the top of the trim

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

I will take a set.

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

PP Sent

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

It was 3-1/8” on my right door but 3-3/8” on my left (not shown). I looked through lots of Blazer pics online and believe the majority are closer to my right door. Because of minor variation in where the trim can be placed, I prefer the top down 1-3/16” dimension even though it is curved. I would mark a piece of tape at 1-3/16 and place it from the top edge of the door sheetmetal and let it curve with the shape of the door. You may want to do hole location from both directions to be most confident before you drill.

I also see variation in the 2-13/16 horizontal dimension online.

I am confident my doors are original to the Blazer, it is a non repainted western survivor. My guess is GM was sloppy about drilling this hole when modifying their truck doors for Blazer use. They may not have had a good jig or other means of locating the hole repeatedly.

Re: 69-71 Blazer Inner to Outer Door Skin Reinforcement Screw & Bezel Kit
 

Thank you for all your input