FS: 72 350 4 bolt main bare block cheap
I have a bare 350 4 bolt main block I removed from a 72 Cheyenne pickup a couple of years ago. Also comes with original crankshaft.
First $100 takes it. Sorry NO shipping. Any questions pls LMK. Thanks Scott |
Re: FS: 72 350 4 bolt main bare block cheap
ttt
|
Re: FS: 72 350 4 bolt main bare block cheap
also have a balanced rotating assembly available, stock pistons, recond rods
Asking $150 or $200 with block |
Re: FS: 72 350 4 bolt main bare block cheap
3970010 casting ? Steel crank?
|
Re: FS: 72 350 4 bolt main bare block cheap
I doubt its a steel crank, but will check the numbers on both and post what I find.
|
Re: FS: 72 350 4 bolt main bare block cheap
still available
|
Re: FS: 72 350 4 bolt main bare block cheap
Quote:
Posted via Mobile Device |
Re: FS: 72 350 4 bolt main bare block cheap
Will confirm casting # tomorrow, and yes I pulled this from a 72 Cheyenne.
|
Re: FS: 72 350 4 bolt main bare block cheap
Any pictures?
|
Re: FS: 72 350 4 bolt main bare block cheap
I'll try to take some pics and get the casting number tomorrow.
|
Re: FS: 72 350 4 bolt main bare block cheap
still available
|
Re: FS: 72 350 4 bolt main bare block cheap
ttt
|
Re: FS: 72 350 4 bolt main bare block cheap
5 Attachment(s)
Here r some pics of the rotating assembly:
|
Re: FS: 72 350 4 bolt main bare block cheap
good deal.. wish it was closer to the left coast......
|
Re: FS: 72 350 4 bolt main bare block cheap
Will sell the balanced rotating assembly for $150 including a set of TRW rings and bearings I've had since the 70's. Will ship
Scott |
Re: FS: 72 350 4 bolt main bare block cheap
Do you still have the block'too?
|
Re: FS: 72 350 4 bolt main bare block cheap
Yupper, asking $100 for the block by itself or add $50 to the other parts listed above and its included.
Scott |
Re: FS: 72 350 4 bolt main bare block cheap
ttt
|
Re: FS: 72 350 4 bolt main bare block cheap
ttt
|
Re: FS: 72 350 4 bolt main bare block cheap
ttt
|
Re: FS: 72 350 4 bolt main bare block cheap
ttt
|
Re: FS: 72 350 4 bolt main bare block cheap
No one interested for $200 for everything??
|
Re: FS: 72 350 4 bolt main bare block cheap
Quote:
Can you put the parts in a wooden box? Thanks! |
Re: FS: 72 350 4 bolt main bare block cheap
I think it would be too heavy, the shipping costs would be very expensive.
|
Re: FS: 72 350 4 bolt main bare block cheap
just for general FYI, 3970010 is a high nickel block. They're pretty bomb proof and a great foundation for a stout little 350. 4 bolt mains, etc. It definitely increases the value if this one is an '0010' block.
|
Re: FS: 72 350 4 bolt main bare block cheap
will also include a double roller timing chain and gear set along with a new chrome timing cover
EVERYTHING for $200!! |
Re: FS: 72 350 4 bolt main bare block cheap
ttt
|
Re: FS: 72 350 4 bolt main bare block cheap
do you have the main caps with the block? i would be interested in this deal. pm me your address so i can map it out from buffalo ny
|
Re: FS: 72 350 4 bolt main bare block cheap
I'm 99% sure I have them but let me check in the morning just to be sure.
|
Re: FS: 72 350 4 bolt main bare block cheap
still available
|
Re: FS: 72 350 4 bolt main bare block cheap
ttt
|
Re: FS: 72 350 4 bolt main bare block cheap
So, did you have the main caps that go with the block?
|
Re: FS: 72 350 4 bolt main bare block cheap
Dario1, so sorry for the delay but finally had a chance to check today, and yes I have the main caps with the block.
|
Re: FS: 72 350 4 bolt main bare block cheap
What bore is the block currently?
Posted via Mobile Device |
Re: FS: 72 350 4 bolt main bare block cheap
3970010 was a general casting number for 350 blocks from 1969-1979 and some 1968 327, and come in nearly every car & truck in all HP configurations. Some were high nickel, most were not. The high nickel blocks had "010" casting mark inside the timing chain cover and some had it on he side of the block.
Posted via Mobile Device |
Re: FS: 72 350 4 bolt main bare block cheap
Stock bore
|
Re: FS: 72 350 4 bolt main bare block cheap
Quote:
Posted via Mobile Device |
Re: FS: 72 350 4 bolt main bare block cheap
Hi Scott, I'm interested I'll give tu a call.
|
Re: FS: 72 350 4 bolt main bare block cheap
"I'll take it all" and can arrange a pickup of the whole package. PM sent.
|
Re: FS: 72 350 4 bolt main bare block cheap
Scott: Did I have any standing in this posting? Dario1 came into this thread late and only ask the question as to whether you had main caps for the block. At no time did he express any interest in purchasing until i expressed interest in this posting. I am away on vacation and was going to contact you when i got back home.
As I looked , back at the thread it seems that GMC 2500 4X4 may have showed interest in this before both of us! |
All times are GMT -4. The time now is 10:44 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com