Re: Cabs Need any cuts, parts etc?!
If I was a dog I'd be mighty proud to call that my house
|
Re: Cabs Need any cuts, parts etc?!
I need a patch for the low hump if the 71 is a low hump if u can pm me a email or cell number I can get you a picture thanks
|
Re: Cabs Need any cuts, parts etc?!
Wish my dane puppies felt the same, as the mattress was new when it went in there originally....ugh
Quote:
|
Re: Cabs Need any cuts, parts etc?!
Those cabs are better than what I started with. In the northeast those things would sell quick.
|
Re: Cabs Need any cuts, parts etc?!
the gas cap and the 2 tone chrome band on cab whats it look like? how much for trim (and clips) and cap shipped to 79106?
|
Re: Cabs Need any cuts, parts etc?!
Were either of these cabs a50 buckets cabs, if so I need bucket brackets and cross member brace. thanks.
|
Re: Cabs Need any cuts, parts etc?!
PM sent with my cell and email
Quote:
|
Re: Cabs Need any cuts, parts etc?!
haha...dime a dozen out here...
Quote:
|
Re: Cabs Need any cuts, parts etc?!
I will take a closer look for you and post pics....
Quote:
|
Re: Cabs Need any cuts, parts etc?!
No such luck...no '67 had buddy buckets.....so, no bucket seat brackets.
Quote:
|
Re: Cabs Need any cuts, parts etc?!
Do either of these cabs have the windshield washer squirters that are not all rusted up? The ones on my 71 Longhorn are rusted & pitted bad. Jamie 71 :gmc2: Longhorn
|
Re: Cabs Need any cuts, parts etc?!
I'm looking for a patch. I need the piece of sheet metal between the cab corners on the back of the cab. Seems the previous owner of mine cut it up to clear a drive shaft or something.
|
Re: Cabs Need any cuts, parts etc?!
Pictures sent
|
Re: Cabs Need any cuts, parts etc?!
I am sure I can help you with that. I will pull them on Monday and make sure they are good...
Quote:
|
Re: Cabs Need any cuts, parts etc?!
Get me pics and measurements and I can help you with that!!
Adam Quote:
|
Re: Cabs Need any cuts, parts etc?!
Pm sent on the patch!
|
Re: Cabs Need any cuts, parts etc?!
Would you consider selling the 67 Cab intact?...it would need shipping to MA.
|
Re: Cabs Need any cuts, parts etc?!
I would consider it, but you would have to arrange shipping etc....
Quote:
|
Re: Cabs Need any cuts, parts etc?!
Ok. I can arrange for the ride. It would depend on what would you need to get for the Cab?
|
Re: Cabs Need any cuts, parts etc?!
1 Attachment(s)
This is the piece I'm needing.
|
Re: Cabs Need any cuts, parts etc?!
I need part of the right side cowl/firewall right above the heater box & on the left side too to the right of the wiring block. Mine rotted due to the cowl being completely stuffed with leaves. I have pics of the areas I need.
|
Re: Cabs Need any cuts, parts etc?!
I'm lookin for the corners in the firewall that tends to rust out on these trucks in the cowl is yours good?
|
Re: Cabs Need any cuts, parts etc?!
1 Attachment(s)
|
Re: Cabs Need any cuts, parts etc?!
1 Attachment(s)
|
All times are GMT -4. The time now is 04:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com