The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 99-06 GMT800 Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)
-   -   side mldg (https://67-72chevytrucks.com/vboard/showthread.php?t=797458)

BigBird05 12-01-2019 06:31 PM

side mldg
 
I had to remove the side door mldg from my 03 Yukon. Does anybody know how to get the rest of the 3M tape glue off of the paint? I've tryed goo gone, goff off and heat gun with a razer blade.

Palf70Step 12-02-2019 08:52 AM

Re: side mldg
 
I have always sprayed WD40 and rubbed it off with towl or a very fine scotchbrite pad. Had to be careful with the scotchbrite or you can scratch paint. It takes several goes at it, but the stuff came off.

bigd65 12-02-2019 05:53 PM

Re: side mldg
 
Dont waste you money on AIRCRAFT ADHESIVE REMOVER..... wont touch it.... get the goo gone that is in the can that looks like the thin lighter fluid.... that is THE ONLY THING TGAT WOULD TOUCH IT

EVRLET 12-03-2019 03:43 AM

Re: side mldg
 
You need to use the 3M eraser wheel. Use 3M only. I’ve used that on every truck I removed the moldings from and never left a scratch. Google it.

BigBird05 02-02-2020 05:38 PM

Re: side mldg
 
Thanks

Redneck Rydes 02-10-2020 12:01 AM

Re: side mldg
 
X2 on the 3M wheel,just use it lightly and a final clean up with WD40,works great,it is all I use.


All times are GMT -4. The time now is 02:34 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com