Re: the panelburb getting cut up
Quote:
|
Re: the panelburb getting cut up
4 Attachment(s)
Quote:
. |
Re: the panelburb getting cut up
Thanks for the pics. The hood trim looks a bit rougher than what I got, but I think I could use the fender eyebrow. Let me know the total and how you want payment. Thanks
|
Re: the panelburb getting cut up
Quote:
|
Re: the panelburb getting cut up
4 Attachment(s)
Quote:
. |
Re: the panelburb getting cut up
Quote:
|
Re: the panelburb getting cut up
Alright, thanks for trying.
|
Re: the panelburb getting cut up
4 Attachment(s)
ok so here is the B pillar. Still have to cut the top off to the left of the blue tape for shipping. I will pm total with shipping for everything.
Richard . |
Re: the panelburb getting cut up
5 Attachment(s)
Ground the bottom of the 3rd door to show the issues
|
Re: the panelburb getting cut up
5 Attachment(s)
more pics
|
Re: the panelburb getting cut up
Hey Richard,
Whats the condition of the front bumper and shipping? I'm looking for a good driver part. My pickup got hit and run. Hoping all is good with you! John |
Re: the panelburb getting cut up
Quote:
If you look close in post 2 you can see a minor crease in the bumper at the outer pass. attachment bolt. Kinda looks like someone was backing up and just did hook into something to catch it. Not terrible but not perfect either. I would take $50 for it plus shipping. Richard |
Re: the panelburb getting cut up
Richard -
I looked thru this post and the link to the other post and did not see anything on the rear bumper? If available, I'm interested in condition and shipping to 50701. Thanks! Paul |
Re: the panelburb getting cut up
Quote:
Quote:
It is about the same as the front bumper. It has a tweek on the outer passenger portion. when the rain quits I will pop out and grab some better pics of both bumpers and post back Thanks Richard |
Re: the panelburb getting cut up
4 Attachment(s)
Here are some more pictures of the bumpers. It is almost impossible to get good ones with the chrome I will have to get them pulled and weighed to get shipping costs so it may be a day or two on that with all the rain we just had.
. |
Re: the panelburb getting cut up
4 Attachment(s)
rear bumper
. |
Re: the panelburb getting cut up
Hi Richard,
Thanks for taking the photos for me. I'm not looking for anything but driver quality, but I'm looking for a straight one .I'm going to pass unless you have another that I'm looking for. Health & happiness, John |
Re: the panelburb getting cut up
1 Attachment(s)
still looks better than the tube I have now!
I'd be interested in the bolts and brackets as well. No hurry on getting the shipping costs - it won't go on the Blazer until fall anyway. Thanks! Paul |
Re: the panelburb getting cut up
1 Attachment(s)
Hey Richard - I need a couple of inner sections of the front fenders. Both driver and passenger sides, see pic. Would you be able to cut up these fenders, or have another set laying around to cut up?
|
Re: the panelburb getting cut up
Quote:
I should have some. I will look and get pics when I get back this afternoon Richard |
Re: the panelburb getting cut up
4 Attachment(s)
Bret
I have 3 sets of fenders I can cut that up from. They all appear in equal condition. This burb is a 68 and i am not sure if there are any differences on the inner like there is on the outer. The white set is on a 69 and the teal green is a 72 if it makes a difference. All of them have rot on the outside so i don't mind cutting them up. $25 per side plus shipping which I won't know till I get them cut and weighed. here are the 68 & 72 pics . |
Re: the panelburb getting cut up
2 Attachment(s)
here are the 69 fenders
. |
Re: the panelburb getting cut up
Quote:
Still have not had a chance to get the bumper off but I forgot I had another one laying here. It is damaged worse but it gives me my weight and sizes UPS ground will run $45 to $50 based on the zipcode. Thanks Richard |
Re: the panelburb getting cut up
Thanks Richard!
shipping to 50701. Let me know the all-in price for the bumper, bolts, and brackets. Paul |
Re: the panelburb getting cut up
Quote:
|
All times are GMT -4. The time now is 05:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com